Rapidyellowxr6tute

^^^Have seen the car but don't know anything about it^^^^^ Has got plenty of poke though!

Bonnet yes, spoiler no.

Yeh, must be unlucky. I'm running 295/30/19 rears and have no issues what so ever and had the same on my previous ute and not a problem either.

Hey Webby, wheels look good mate....was behind you at the bottle shop the other day and they sit nice from behind!

Yeh, I sort of figured that Pazzo as the Vertini's I've got on there now are a +20 on the front and no rubbing issues at all with a 245/32/19. The reason I'm concerned about the rears is that I want to run a 275 or 285/30/20 because the 295/30/19's on the rear atm are fine and I have room to move and that's with a +35 offset. Just don't want to spend the coin and have rubbing issues but if I have to run a spacer on the front I won't be getting the TSW's.

Hi Guys and Girls. I'm keen on a couple of the TSW wheels in 20" staggered for my FG ute but what I'm wondering is if the 20 x 10.5's for the rear will fit ok as they only seem to come with a 25 offset in the 10.5's or you can get them in a 20 x 9 rear with a 30 offset also. The fronts have a 40 offset so I'm hoping they will be fine also. Any advice would be appreciated as I want to order a set! Thanks very much......Worm or Henz????? lol

Yep, swap them over as Ford will look for any excuse to void your claim mate :(

Sorry for the late reply mate. I went with a mild steel but yeh, I was very dissapointed as it was a nightmare to fit and it hit the tailshaft. It was also way too loud for day to day duties and I was told from the start to stick with a 2 1/2 inch system and I should have listened! The drone was shocking but I have to admit, it sounded great at higher revs but just too loud for my liking.

G'day Lads, sort of off topic but I've got a set of Vertini Magic's for sale....rims only. 19 x 8.5 & 19 x 9.5 matte black. From memory +32 front and +35 or 38 rear. PM if interested.....listed in classifieds on here too. Cheers!

Yep, I'm with Henz mate, get a sound clip up ASAP! I first tried an Xforce 3 inch system and to be honest, it was terrible....the drone between 1500-2500rpm was enough to want earplugs and it hit the tailshaft so needless to say, it got pulled off the next morning and sent back...thanks but no thanks! I ended up going for a hurricane 2 1/2 inch system and it is great, no drone at all and a good bark when getting stuck into it and I used the standard tips so it still retains the factory look. I was a dissapointed to say the least as I had an xforce system on my previous ute and it was great.....maybe I got a Friday built exhaust on the GS!

Cheers Henz, I'm interested in your Rota's mate.....can you or is there a pic you can post for me to have a look at? What sizes are they? Thanks!

G'day all, wanting to buy a second set of wheels for my FG ute. I like the look of these but I'm wondering if a 245/35/19 will go on a 19 x 9.5 rim without looking to stretched? Any advice on the best offsets for the front & rears would be appreciated. I will be running 295's on the rears, the same as what's on my Vertini's at the moment. Cheers

Spot on Benny, well done mate. That should put this thread to bed once and for all!

Yeh ratter, that's what I've found out.....only available in 20ltrs or 60ltrs and I can get it through my local Bursons or just get through my sister as she's an accountant at a Ford/FPV dealership so I've given her a 20ltr container to fill up for me! A fair bit cheaper too

Yep, have to agree whole heartedly with Ratter & SteveR......save your money and buy the S/C GS/GT. So much potential from factory and it's an absolute gem of an engine. Head down to your dealer and get your hands on one before the last of the 'proper' FPV's are gone.