Thermostat houseing.

[nuff72]

Hey all, Happy long weekend. Have a leaking seal in housing, pretty sure it's leaking from coolant pipe. Have tried removing pipe too replace this seal, But cannot move it?? Any pointers would be appreciated.

[k31th]

can't see any obvious signs of coolant leakage there...

[nuff72]

Hey there ,been looking before every start up, it's always wet on the bottom of the housing? Have had it pressure tested ??was told no leak! Has been this way for about 2 months when I first noticed coolant dripping a little bit under the car.

[k31th]

ok... must be when it cools down that it allows a drip or two to get out.

 

so what's the actual problem? which part are you having trouble removing?

[nuff72]

That single pipe ,that has the one bolt , on the bottom housing. &how do I turn off simple functions on taptalk.??

[arronm]

In that image there are 4 locations it can be leaking from.

 

Hose at thermostat. 

Thermostat to housing

Turbo feed.

O ring at pipe. 

[nuff72]

I thought I would replace that seal where that pipe goes in with the bracket! I read somewhere on the site they just pull the pipe out enough to replace seal!! Have tried, it will not move?I didn't think it would
No where for it to move.

 

Sorry wrong hole.

 

Sorry lads.

[k31th]

22 minutes ago, nuff72 said:

how do I turn off simple functions on taptalk.??

turn off your tapatalk signature. it's in the settings on the app.

[nuff72]

Ok then thanks for that.