Puffwagon Gold Donating Members 16,348 Member For: 10y 3m 20d Gender: Not Telling Posted 12/04/18 05:58 AM Share Posted 12/04/18 05:58 AM I was going to suggest tapping the underside of the lower thermostat housing. Link to comment https://www.fordxr6turbo.com/forum/topic/93829-resistance-for-coolant-and-oil-temp-sensors/page/2/#findComment-1655436 Share on other sites More sharing options...
red80 New Member 12 Member For: 7y 10m Posted 12/04/18 08:58 AM Author Share Posted 12/04/18 08:58 AM Plenty of options to fit an aftermarket sensor, have removed the factory water pipe from the thermostat housing and tapped that out to 1/2 bsp to run a proper pipe with -6 fittings to the turbo, also tapped under the thermostat so I can run my factory dash coolant temp (66 XR Falcon). This runs true engine temp not after the thermostat opens. As the fuel and other maps are corrected by engine temp it needs to be accurate. the haltech(Commodore) sensor is only $50, I thought they were more than that so may go to that if the factory one doesn’t play ball. Link to comment https://www.fordxr6turbo.com/forum/topic/93829-resistance-for-coolant-and-oil-temp-sensors/page/2/#findComment-1655439 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now