Drift Wheel Offset

[manlet]

After some thought id be happy with the following :

http://uploads.tapatalk-cdn.com/20160121/ff92d32eec1302ec5c4766f717f7b3f5.jpg

http://i1140.photobucket.com/albums/n570/quasyt/E5B02C0C-B268-4A1E-9B58-43A73DF3084F-3085-0000029840FCFEB9.jpg

A little bit of poke but not too much as I am unfamiliar with the laws in WA

[PTR_NITRO_FG]

Is this your car now?

Go to online calculator and plug in current specs/new specs and measure how far they will move?

Your current setup looks sensible flush atm lol

WA coppers are hit and miss....99% you're fine, but its just that one cop who wants to be a *beep* and pokey wheels = canarie. If your car is modded, you dont need the headache. But if its flush (or I think at least the top part of lip is within gaurds) then you should be fine.

[bamk2f6tornado]

thankyou for advice guys,

How would 17 x 10 +0 offset(http://www.ebay.com.au/itm/Dynamic-17x10-D-Shape-Hole-Drift-Steel-Wheel-5x114-3-0-Black-/131654328668?hash=item1ea735a15c:g:QuoAAOSwKtlWn8SI) on the rear and 17 x 9 +10 on the front fit

I have stock xr6 turbo ute ride height at the moment

Those would fit and look pretty decent. Rears will poke about 15mm more than my rears and fronts 8mm more. You could easily roll/pump the guards out that far.

Regarding the legal side of things if your no caught being stupid and you pass the attitude test you should be sweet