bjacobs Member 143 Member For: 12y 9m 24d Gender: Male Posted 09/09/15 11:50 PM Author Posted 09/09/15 11:50 PM Ahh I see, how much are the npc clutches? HahaSent from my iPhone using Tapatalk
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 11m 23d Gender: Male Location: Perth Posted 09/09/15 11:50 PM Posted 09/09/15 11:50 PM The noise in the video is the clutch........can't comment as to why your mates car doesn't make the noise.I find it interesting that the stock bearing has too much free play but a bush doesn't. The bearing I listed above is the way to go. Replaces the stock bearing and is a semi neat fit on the input shaft so it's fully supported.
ratter Member 6,793 Member For: 20y 3m 19d Gender: Male Location: @ my laptop Posted 09/09/15 11:51 PM Posted 09/09/15 11:51 PM gearbox roll over noise can be amplified with some clutches
bjacobs Member 143 Member For: 12y 9m 24d Gender: Male Posted 09/09/15 11:51 PM Author Posted 09/09/15 11:51 PM Ahh I see, how much are the npc clutches? HahaSent from my iPhone using Tapatalk
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 11m 23d Gender: Male Location: Perth Posted 09/09/15 11:52 PM Posted 09/09/15 11:52 PM gearbox roll over noise can be amplified with some clutchesAgree, but the noise in the video isn't roll over noise. Ahh I see, how much are the npc clutches? Haha Sent from my iPhone using TapatalkSimilar to what you paid for the Xtreme. Why did you go ceramic at your power level?
ratter Member 6,793 Member For: 20y 3m 19d Gender: Male Location: @ my laptop Posted 09/09/15 11:53 PM Posted 09/09/15 11:53 PM with foot off the clutch, the clutch itself should not be making any noise from the intermediate plate as it will be clamped 2
Ralph Wiggum Moar Powar Babeh Legacy Donating Member 19,334 Member For: 20y 11m 23d Gender: Male Location: Perth Posted 09/09/15 11:58 PM Posted 09/09/15 11:58 PM Was the gearbox serviced while the clutch was out? Ask you mechanic if he set the CSC height to spec for that clutch.
eff xr6t Member 569 Member For: 12y 11m 16d Posted 10/09/15 12:01 AM Posted 10/09/15 12:01 AM Quadruple post good effort haha. The grinding noise with your foot on the clutch is definetly normal the rattle when you take you foot off isn't. does it go away if you hold the revs steady at an extra 200rpm above the stock idle? Say around 800-900rpm? 1
bjacobs Member 143 Member For: 12y 9m 24d Gender: Male Posted 10/09/15 12:02 AM Author Posted 10/09/15 12:02 AM I only went this clutch because my mate got it like I said and I drove his car and liked it and it wasn't too loud or anything so I just went with the exact same. The xtreme was only $1650, think it cost me about $2100 installed, got a service at the same time so that was the extra money. Wish I did more research now thoughSent from my iPhone using Tapatalk
bjacobs Member 143 Member For: 12y 9m 24d Gender: Male Posted 10/09/15 12:23 AM Author Posted 10/09/15 12:23 AM Box was not serviced but only has 13k on the clock, even the stock clutch that came out has a lot left on it. I'm aware of the normal twin plate noise when the clutch is engaged, not concerned about that. Sent from my iPhone using Tapatalk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now