How To Replace Radiator Support Fg F6 2009?

[Knackers]

New part

[ratter]

$150 would seem pretty cheap to strip everything down, fit it etc but I'm not a beater

[jacobmitchell92]

Yeah mate same part, but I did already have the bumper off and the cooler and pipe work off it. All that had to be done was remove all the other accessories cut the old one out and weld the new in and paint it.

[Knackers]

Ah ok, well stay friends with that repair shop mate, that's a good price.

Due to the damage extent mine was a little more. There was a lot of cable tie action and sikaflex used. Intercooler and aircon condenser were both bent (still are)

They trial fitted everything (before welding) to ensure a nice finish then striped down again to weld in/paint before fully assembling everything again. Required aircon regassing etc.

They had the car 5 days making sure it's done properly.

I'm going after the previous repairer with the invoice. All the "repairs" were done by him and paid for previously. So he ripped the previous owner off about a grand in parts that he claimed to have replaced but clearly were not.

[jacobmitchell92]

As long as it gets done properly and you back on the road the price doesn't matter I suppose!

Yeah unfortunately there is some dodgy people out there.

[sethjohnno]

@Knackerswhats the part number for the radiator support. Been trying to find one for mine but havent had any luck. Cheers