genx2g Member 95 Member For: 12y 11m 13d Posted 05/02/14 10:30 AM Posted 05/02/14 10:30 AM all of a sudden my car has a red hand symbol pop up on the dash and wont let me lock or unlock my car?Can anyone please explain this to me
Dagabond Bored Member Administrator 35,722 Member For: 23y 10m 19d Gender: Male Location: Dé·jà vu Posted 05/02/14 10:50 AM Posted 05/02/14 10:50 AM Did it also lock the glovebox?...
genx2g Member 95 Member For: 12y 11m 13d Posted 05/02/14 10:57 AM Author Posted 05/02/14 10:57 AM is that a serious question? if so, I dont know didnt check.
Bizkets is Drunk? Too heavy needs boost Member 5,929 Member For: 13y 1m 28d Gender: Male Location: Adelaide Posted 05/02/14 11:11 AM Posted 05/02/14 11:11 AM ^^^ good one dags.<br />have a look in your fraud manual
Rab WOT? Legacy Donating Member 10,981 Member For: 13y 7m 8d Gender: Male Location: Frankston, 3199 Posted 05/02/14 11:16 AM Posted 05/02/14 11:16 AM Immobilizer - am sure there was a thread about the same issue in the last week or so. Will try and find it
Rab WOT? Legacy Donating Member 10,981 Member For: 13y 7m 8d Gender: Male Location: Frankston, 3199 Posted 05/02/14 11:23 AM Posted 05/02/14 11:23 AM Can't find anything - might have been another forum. I think battery charge was a thing to check
Adran Member 38 Member For: 13y 6d Posted 05/02/14 11:26 AM Posted 05/02/14 11:26 AM I had this problem in my au ute which has something to do with the old au keys where the battery in the key will drain to a level it does not deactivate the car immobiliser... Hope this helps
f-wolf Member 897 Member For: 19y 5m 8d Gender: Male Location: ACT Posted 05/02/14 10:47 PM Posted 05/02/14 10:47 PM This light is the security indicator & is activated for 3 seconds when the ignition is first turned to the ON position. The security indicator is continually flashed when the ignition is turned to the OFF position.If the Security Indicator is always on and you can't start the car then the PCM (powertrain control module - main computer) and/or the BEM (body electronics module) has engaged the security system.This is caused by a system malfunction. The system is quite complex and has many sensors and switches (called inputs) that could be the cause.The next step is to have a Multifunction Output Test done to see what's causing the fault.This is best done by your local Ford dealer as they have the correct tool to do it - called a WDS (worldwide diagnostic system).Unfortunately there is nothing that you can do at home to rectify this.From:http://www.justanswer.com/ford/6n8tw-ford-falcon-warning-light-shape-human-hand-lit.html 1
f-wolf Member 897 Member For: 19y 5m 8d Gender: Male Location: ACT Posted 05/02/14 11:24 PM Posted 05/02/14 11:24 PM (edited) Also... have you checked the battery in your: Edited 05/02/14 11:27 PM by f-wolf
Rab WOT? Legacy Donating Member 10,981 Member For: 13y 7m 8d Gender: Male Location: Frankston, 3199 Posted 05/02/14 11:36 PM Posted 05/02/14 11:36 PM Haven't changed anything recently, pugged anything new in?You were having similar troubles when you plugged in an OBDII?Have heard with other vehicles that the system can do a random check of the system components - someone can change a head unit, seat etc and car works fine for a while - until the system check randomly queries the item that was changed. Then it kicks up the error.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now