Ba Mk2 - Turbo Cutting Out, Shaking And Stalling

[pharkit]

Take it to Tunehouse in marrickville. That's where I used to go when I was in Sydney.

[fatz_f6_typhoon]

Nah sciara usually every month or so have a look in the nsw cruise section there's a write up for the 20th of this month come down meet the lads talk smack eat a hot dog or 3 kick a tyre ...

Edited 16/09/13 05:15 AM by fatz_f6_typhoon

[Sciara]

Youre all going to laugh!

Just dropped it off at the mechanics, he hoisted it up straight away and had a check. The ringing was coming from the heat shield and the bracket on the last two bolts of the heild shield not being tightened down. so that was nothing.

The best part, the massive sucking noise, shaking and stalling all came from too much air getting in, tirgering the sensors. The lower pipe connecting the intercooler had completely come undone and was flapping around without a seal. The other side was alos loose.

All that worrying for nothing hahaha.

Thanks for all your help, ill write up exactly what he fixed when I get the car back.

[PSI O6T]

thank god for that well done....