Upgraded Tailshaft Vibration

[fehlbie]

They are very sensitive to imbalance, fords recommendation is that the imbalance should be under 80 milligrams.

[CHLAXN]

Here is a pic of mine in the ute. Was lucky that it has no vibrations or noises. Hardy spicer in Mackay did mine.

[wilba]

So your center barring isn't even spaced! By the look of the pic. I really dnt no what to do my is spaced that The shaft is just about straight from gear box to diff. at a guess about 50mm

[wilba]

This is what mine looks like

Edited 06/10/13 09:24 PM by wilba

[wilba]

What sort of centre barring is that?

Here is a pic of mine in the ute. Was lucky that it has no vibrations or noises. Hardy spicer in Mackay did mine.

Here is a pic of mine in the ute. Was lucky that it has no vibrations or noises. Hardy spicer in Mackay did mine.

[CHLAXN]

Stock center bearing mate. Guys at hardy spicer said too see how it goes with the stock one as you don't have to space it. If it's no good they will put a bigger one in but need the car as it will have to be spaced like yours is. So far it's holding up.

[wilba]

To easy.I might try that