Thoughts On This Setup

[PSI O6T]

ok ive been doing a bit of research for the new brake combo for the BA ( shuddering)

front - fg calipers with dba t2 325mm x 32mm rotors.

rear - territory calipers dba t2 328mm rotors. ( will bf 328mm fit my original calipers)

keeping in mind its a street car driven daily( very spirited) with no track work.

prob over 1k with pads im thinking, or do I just get the 4 pot brembo;s ,lol

thoughts.

[sexual harrassment panda]

leave the rears and do the fronts and all your front bushes

[PSI O6T]

is this all I need ?

http://www.ebay.com.au/itm/SUPER-PRO-FORD-FALCON-AU-BA-BF-FRONT-LOWER-CONTROL-ARM-BUSHES-KIT-XR6-XR8-BUSH-/110956559628?pt=AU_Car_Parts_Accessories&hash=item19d586bd0c

[_Velocity_]

That's just for front lower control arm. There's upper control, lower control, sway bar and strut to control arm bushes as well.

Here's the whole super pro kit on eBay

http://item.mobileweb.ebay.com.au/viewitem?itemId=281068022841&index=0&nav=SEARCH&nid=61746163476

Edited 07/03/13 04:52 AM by _Velocity_

[Ralph Wiggum]

stick with stock rubber strut to control arm bushes

[_Velocity_]

Are they a bit rough on the ride Ralph?

[Ralph Wiggum]

yes

[BRK]

I don't think the 325 x 32 rotors fit the fg caliper - suspect you need the BA GT caliper.

328 vented rears off territory need the terry caliper.

[spinr33]

If you want to do it on the cheap get a 2nd hand set of fg turbo brakes and calipers I've seen these go around $300-$350 a set pads calipers and discs, get the discs machined and chuck some ferrodo ds pads in for about $185 that's like $500 ish dollars don't worry about the back as u say its street driven.

I have DBA T2 and ferrodo ds been hammering them as a daily no shudder minimal dust best combo for the dollars $$$ about $400 disks and pads

[_Velocity_]

Hey spinr33 did you need brackets or anything to fit the standard FG XR6T brakes?