Clutch Recommendations

[rollex]

It also comes with a new spiggot bearing and 11" flywheel for that price, much like the malwood option, so it is definitely better value.

Edited 07/10/14 12:02 AM by rollex

[Pazzo]

New CSC aswell?

[rollex]

Slave cylinder?

This is what comes with the kit, unsure if that device underneath is what the slave looks like, do these boxes run an internal slave cylinder?

edit: it looks like that is what the slave looks like so yes, it does.

Edited 07/10/14 01:53 AM by rollex

[honer]

Damn that's a good price.

[rollex]

I don't know why they don't advertise the price and kits on their website, why anyone would go the others at $4-500 more? Maybe they make most of their cash from resellers who buy bulk.

[Pazzo]

Yeah comes with it.. Can see in pic.

Mad price.

[6speedXR8]

Well the clutch discussion is still going and there are a lot of clutch packages on the market, the package that we have been offering for years is in my opinion the best package available and for over 10 years the results are there.

Everyone is entitled to there own opinion about what clutch is best and what is the best value, however not all packages are the same!

The clutch packages that I offer do not use heat treated precut ring gears as they shatter and fail, ( I have proof via photos but I can't work out how to add a photo )

The Flywheels that I offer are made to my specs and are machined from premium steel and use the factory ring gear.

The pressure plate is balanced, the clutch disc has composite organic facing with an insulated hub, the flywheel bolts are ARP, the pressure plate bolts are High Tensile socket head cap screws, the pressure plate locating dowels are machined from high tensile bar and heat treated, the CSC is an Alloy unit with a Billet Alloy piston instead of the normal plactic one that distorts with heat and there is also a braided flexible bleeder that allows for the bleeding of the clutch without fluid running into the bellhousing.

I also supply a Braided fluid line with a Quick Disconnect fitting the the master cylinder, an alignment tool and lastly instructions.

OPTION 3 PLUS $1,775.00 11" BILLET STEEL FLYWHEEL, 11" HIGH PERFORMANCE PRESSURE PLATE WITH INCREASED CLAMP, 11" HIGH PERFORMANCE SPRUNG COMPOSITE ORGANIC CLUTCH PLATE, HIGH PERFORMNCE ALLOY C.S.C WITH BRAIDED BLEEDER, FLYWHEEL BOLTS , PRESSURE PLATE BOLTS & SPIGOT BEARING , BRAIDED DELIVERY LINE >> Rated to 410 RWKW

Mal Wood

[6speedXR8]

I worked out how to attach photos, have a look at what can happen with precut heat treated ring gears.

Mal Wood

[rollex]

Out of that list what does your kit have that the NPC kit does not have?

[JETURBO]

BTW I always include the braided remote bleeder hence why my price was higher when talking about that NPC kit rollex