Jump to content

Recommended Posts

  • Legacy Donating Member
  • Member For: 16y 3m 9d
  • Gender: Male
  • Location: Yarra Valley
Posted

Hey guys,

Picked up some grids the other day and was fitting them this morning. The rears at (+35) fit perfectly on a 9.5" width, but when I went to put the fronts on, it seems the hub was hitting the centre cap and pushing it out. Also even when I took the centre caps out it didnt seem to have anywhere near enough offset. Also the fronts are a 8.5".

Got them from a dealer who said he'd fitted them to a few falcons and always went those offsets. So is the offset right or something a little off ? Needless to say, not happy this morning but just want to get them on !

Any ideas??

Cheers

  • Legacy Donating Member
  • Member For: 15y 11m 17d
  • Gender: Male
Posted

They should fit as my Rotas were the same offset, forum member Henz bought them off me and has them fitted on a BF ute.

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Legacy Donating Member
  • Member For: 18y 6m 19d
  • Gender: Male
  • Location: Vic
Posted

I run a 5 mm spacer to make +20 and flush.

  • Legacy Donating Member
  • Member For: 16y 3m 9d
  • Gender: Male
  • Location: Yarra Valley
Posted

Ok just seems as though a +15 or as you said Henz +20 would be better . I'll take them back to the shop and see what they reckon. Hopefully they can fit them up when a call in.

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Legacy Donating Member
  • Member For: 18y 6m 19d
  • Gender: Male
  • Location: Vic
Posted

Cough shoulda brought mine cough

  • Legacy Donating Member
  • Member For: 16y 3m 9d
  • Gender: Male
  • Location: Yarra Valley
Posted

Haha maybe.

Is there still plenty of room for the nuts to grip after the 5mm spacer went in Henz ?

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Legacy Donating Member
  • Member For: 18y 6m 19d
  • Gender: Male
  • Location: Vic
Posted

Heaps.

  • Legacy Donating Member
  • Member For: 16y 3m 9d
  • Gender: Male
  • Location: Yarra Valley
Posted

No worries, will give that a crack. Also seems that the wheel is pretty lose around the hub when the wheel nuts off ? Happen to any of you blokes ?

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Legacy Donating Member
  • Member For: 18y 6m 19d
  • Gender: Male
  • Location: Vic
Posted

Who did you get then through?

  • Legacy Donating Member
  • Member For: 16y 3m 9d
  • Gender: Male
  • Location: Yarra Valley
Posted

Wheel tech in dandenong (rota dealer). When I put them on, the hub pushes the centre cap out (don't think it should), and then even with the centre cap off it seems very lose on the front. So don't think the measurements are 100%.

Backs fit up perfectly though :s. Strange.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...