gmhkla Legacy Donating Member 45 Member For: 16y 4m 13d Gender: Male Location: Hoppers Crossing Posted 01/12/12 08:21 AM Author Posted 01/12/12 08:21 AM thank you Mr_4.0 someone with a decent not so hard reply. it will be on the list of things to do in the coming days :D
ratter Member 6,793 Member For: 20y 3m 25d Gender: Male Location: @ my laptop Posted 01/12/12 08:32 AM Posted 01/12/12 08:32 AM (edited) did you read post 2?even if the wastegate is your issue, the SCT software can configure the tune so as not to set a fault Edited 01/12/12 08:34 AM by ratter
Never had any say Panda I <3 Floods Legacy Donating Member 11,198 Member For: 15y 1m 21d Gender: Male Location: South West QLD Posted 01/12/12 08:37 AM Posted 01/12/12 08:37 AM You have either 1 of 3 issues or possibly a couple combinedYour tuner does not know what to adjustThe HP does not allow correct turbo controlYour wastegate is not controlling the boost correctly, but either of the above can stop this from setting the codeI'll just quote it again incase..
gmhkla Legacy Donating Member 45 Member For: 16y 4m 13d Gender: Male Location: Hoppers Crossing Posted 01/12/12 08:41 AM Author Posted 01/12/12 08:41 AM Ok then why only my car and not the other BAs BFs and FGs his done???????????????????????????????????????????The wastegate could be internally faulty. Should you be able to move the rod and open the flap by hand?
ratter Member 6,793 Member For: 20y 3m 25d Gender: Male Location: @ my laptop Posted 01/12/12 08:45 AM Posted 01/12/12 08:45 AM It may not be faulty but still be causing overboost but even if it was faulty, SCT can stop the code! 1
gmhkla Legacy Donating Member 45 Member For: 16y 4m 13d Gender: Male Location: Hoppers Crossing Posted 01/12/12 08:59 AM Author Posted 01/12/12 08:59 AM that's all good mate but it was doing it with the SCT too
ratter Member 6,793 Member For: 20y 3m 25d Gender: Male Location: @ my laptop Posted 01/12/12 09:10 AM Posted 01/12/12 09:10 AM Many people can make power with these cars as that is the easy part, problem solving is an entirely different matter though.SCT can stop this code from appearing for sure, I know this because I have seen cars with this issue, I would assume HP would also, but I do not use my HP for Ford as SCT has better control, I use my HP for holdens as it has better control on them compared to the SCT
gmhkla Legacy Donating Member 45 Member For: 16y 4m 13d Gender: Male Location: Hoppers Crossing Posted 01/12/12 09:32 AM Author Posted 01/12/12 09:32 AM Hmmm, well I just gave the IAT and MAP sensors a clean. I'll get a wastegate actuator for it as I may need it for further future mods anyway and we will see how it goes.One more question for you rattled. Should or shouldnt I be able to open the wastegate flap by moving the rod with my hand?
turbowelshy89 Member 147 Member For: 16y 1m 27d Posted 01/12/12 09:43 AM Posted 01/12/12 09:43 AM Is it standard? It should be pretty firm either way.
gmhkla Legacy Donating Member 45 Member For: 16y 4m 13d Gender: Male Location: Hoppers Crossing Posted 01/12/12 09:54 AM Author Posted 01/12/12 09:54 AM Yea it's a stock actuator I'll give it a go tomorrow
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now