CCCC miso xr6 Legacy Donating Member 317 Member For: 17y 9m 12d Posted 11/09/12 08:54 AM Posted 11/09/12 08:54 AM (edited) Hi Guys,I thought I'd post up my build. Its a 2003 BA XR6 Turbo.The Mods consist of : - GTX 3582R Turbo - ETM Manifold and 4" Dump Pipe - 3.5" Exhaust System from Dump Pipe - Turbo Smart 48mm External Wastegate - Nizpro Big Big Intercooler - Atomic Valve Springs - Speed Flow Fittings and Braided Lines - Plazmaman Intake and Intercooler Piping - Plazmaman Surge Tank with AeroMotive A1000 Fuel Pump - Walbro Intank Fuel Pump - Siemens Deka 80lb Injectors - Billet Fuel Rail and Turbo Smart Fuel Reg - B&M Transmission Cooler - Dominello Stregthened BTR 4 SPD Gearbox with 3000RPM Stall Converter - Mickey Thomson ET Streets at the back. - AutoMeter Cobalt Series Gauges, inc. Shift Light - PLX OBD2 GaugeI have made 358 RWKW on 17 PSI boost with 100 Octane fuel from United servo. I have also got a E85 tune not finished yet because of my old fuel system. But since I have put in the new fuel system I will be chasing 450 RWKW.Cheers !Miso Edited 11/09/12 09:05 AM by CCCC
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Legacy Donating Member 9,946 Member For: 18y 6m 1d Gender: Male Location: Vic Posted 11/09/12 08:56 AM Posted 11/09/12 08:56 AM Sleepy
CCCC miso xr6 Legacy Donating Member 317 Member For: 17y 9m 12d Posted 11/09/12 09:14 AM Author Posted 11/09/12 09:14 AM I also forgot to give a BIG Thanks to JOE at Crescent Motorsport for his Magic tune and for all his work and efforts put onto this car. Cant recommend him enough !
bionicxr6t05 Legacy Donating Member 2,216 Member For: 15y 1m 24d Gender: Male Posted 11/09/12 09:16 AM Posted 11/09/12 09:16 AM Nice work, crazy mounting angle on the turbo! Bloody tight fit.. 1
Paulie2256 Legacy Donating Member 7,441 Member For: 17y 9m 30d Gender: Male Location: SE Melbourne Posted 11/09/12 09:18 AM Posted 11/09/12 09:18 AM Is this on standard rods?
IMLOCO Member 397 Member For: 14y 6m 4d Posted 11/09/12 09:30 AM Posted 11/09/12 09:30 AM Interior looks epic ! Congrats mate well done 1
CCCC miso xr6 Legacy Donating Member 317 Member For: 17y 9m 12d Posted 11/09/12 09:30 AM Author Posted 11/09/12 09:30 AM Is this on standard rods?Hi mate yea its all on standard rods, iv been pumping out 350 rwkw for a while now,an I give it a hard time all the time with no problems ever, the 450rwkw tune that im getting done next week on united e85 is just for one meet were all my buddys will be racing at the next test an tune event down here in sydney, there all in there little high powered rotaries so I want to give them a run lol, but other then that joe is building me a new forged motor, sould be done by late october.
Paulie2256 Legacy Donating Member 7,441 Member For: 17y 9m 30d Gender: Male Location: SE Melbourne Posted 11/09/12 09:33 AM Posted 11/09/12 09:33 AM nice work 1
CCCC miso xr6 Legacy Donating Member 317 Member For: 17y 9m 12d Posted 11/09/12 09:36 AM Author Posted 11/09/12 09:36 AM nice workInterior looks epic ! Congrats mate well donethanks guys
mic Legacy Donating Member 1,725 Member For: 18y 8m 2d Gender: Male Posted 12/09/12 09:09 AM Posted 12/09/12 09:09 AM awesome I love this mate well done !! 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now