Bf Xr6T Mods

Death_Stalker · 30/08/12 11:02 PM

I've got a mk1 bf xr6t with the zf

Currently the car is making about 275 rwkw and was last tuned about 4yrs ago

1. custom tune (older capa box from nizpro)

2. upgraded valve springs

3. high flow injectors

4. high flow cat

Everything else is stock, I'm looking to get to about 300-310 rwkw with good mid range power.

I know I'll need a cooler and pipe kit, but is there anything else I should consider?

I'm not looking to make much more power than that.

Thanks

Mark

**MX Dave** · 30/08/12 11:15 PM

Surge tank first option. Walbro intank Second option

**rbjet** · 30/08/12 11:26 PM

Cooler, fuel pump and wastegate actuator.

**Weaponxr** · 31/08/12 12:07 AM

Pick the right tuner and take their advice after telling them what you want out of the car

Death_Stalker · 31/08/12 12:12 AM

Nizpro are a option but are pretty expensive, who can you suggest in Melbourne?

Really want do do it right the first time

**Ciaran** · 31/08/12 12:20 AM

What Dave said

Get IC to help the heat soak.

Usually injectors, cat, K&N panel filter + F6 snorkel and tune will get you around 300-310 so maybe just get a new tune?

That or port turbo + wastegate

Retune now would almost definitely give you more power though, 4 years ago was a while ago so it's probably lost a bit since then.

Edited 31/08/12 12:26 AM by Ciaran

Tom Oldfield · 31/08/12 05:33 AM

What boost was this on?

**_Velocity_** · 31/08/12 08:12 AM

Injectors and surge and go e85

Recommended Posts