Jump to content

Recommended Posts

  • Thooperrrrrrr
  • Legacy Donating Member
  • Member For: 15y 3m 3d
  • Gender: Male
  • Location: NOR, Western Australia
Posted

Yup usually have about a 3rd of a bottle left after a flush here.

  • Legacy Donating Member
  • Member For: 15y 5m 29d
  • Gender: Male
Posted

If you own a compressor get a vacuum bleeder and its an easy 1 person job, you dont even have to press the pedal.

Yeah we use a suction pump at work in same fashion for fluid change. Although a proper two person bleed always yields better results if done properly. The vacuum can sometimes draw air through the thread.

If the nipples aren't drawing don't stress. Fully undo them unblock the little hole with a pin or needle then smash compressed air down it. Put it back in and all good :)

Guest XR09
  • Guests
Posted

Try bleeding bloody Honda's linked brake system without a speedbleeder. Hide the oxy first or you will burn the bike.

  • 4 weeks later...
  • Member
  • Member For: 14y 8m 26d
  • Gender: Male
  • Location: Melbourne
Posted

hey guys, can anyone tell me what sort of milage, the brake fluid should be changed at? I'm at 53,000 and im about to change pads over as there shot.

cheers

  • Moar Powar Babeh
  • Legacy Donating Member
  • Member For: 21y 12d
  • Gender: Male
  • Location: Perth
Posted

change pads/change fluid. Fluid is cheap, brake system failure is not :spoton:

  • Member
  • Member For: 14y 8m 26d
  • Gender: Male
  • Location: Melbourne
Posted

The car is a late model 2010 mate. what do you reckon?

  • Member
  • Member For: 20y 4m 8d
  • Gender: Male
  • Location: @ my laptop
Posted

should be close to being due for a change, should be changed every 2 years and always use fluid from a sealed container

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...