brodiegreat New Member 12 Member For: 14y 10m Posted 26/02/12 10:13 PM Posted 26/02/12 10:13 PM hi, ive just purchased a rapid systems v1 kit and started installing it the other day. ive run into a few issues with the fitment. can anyone tell me how they installed theirs? the only real issue ive come across is the plastic cross over bar at the front of the vehicle where the standard cooler mounts to, the new cooler is clearly not going to clear it. ive seen a few pictures of installed intercoolers on fg's and have noticed that this bar is missing (cut out). so.......I just wanted to know if removing this cross over is something that is commonly done or is removing it detrimental to the vehicle. if so ill just trim it to fit. thanks for your help.
bjc Legacy Donating Member 2,823 Member For: 23y 13d Gender: Male Location: Townsville Posted 27/02/12 03:06 AM Posted 27/02/12 03:06 AM Didn't Chris give you instructions with the kit? What car also as I'm guessing an FG?
SecaBoy Legacy Donating Member 203 Member For: 17y 7m 15d Posted 27/02/12 03:08 AM Posted 27/02/12 03:08 AM are you talking about this piece?I cut mine out.
Dillz Three pedals are better then two.. Legacy Donating Member 15,637 Member For: 19y 3m 22d Gender: Male Location: Melbourne Posted 27/02/12 03:49 AM Posted 27/02/12 03:49 AM You have to cut it out, everyone that has something other then a PWR cooler has had to cut it out.
Process West Member 248 Member For: 20y 3m 15d Gender: Male Location: Wollongong NSW Posted 27/02/12 06:12 AM Posted 27/02/12 06:12 AM There are different levels of cutting though...the pic above has the mounts for the factory intercooler cut out as well...My stage 2 leaves these mounts intact...makes going back to stock a whole lot easierKev
fg turbo ute Member 8 Member For: 18y 15d Gender: Male Location: Cairns.QLD Posted 27/02/12 06:14 AM Posted 27/02/12 06:14 AM Cheers guys, I figured this and removed it before reading your posts. but no I havent recieved fitting istructions, ive asked him and he reckons he'd email them to me. thanks again. if you guys have pictures of moving the radiator too thatd be great. cheers
arronm Dropping a turd Legacy Donating Member 9,520 Member For: 18y 10m 21d Gender: Male Location: Perth Posted 27/02/12 07:03 AM Posted 27/02/12 07:03 AM Rapids = 9 inch grinder.Remember to wear your safety glasses.
fg turbo ute Member 8 Member For: 18y 15d Gender: Male Location: Cairns.QLD Posted 27/02/12 08:48 AM Posted 27/02/12 08:48 AM Yeah I had that in mind when I cut it, but the intercooler is 60mm wider so their gonna have to go also
1NSANE Legacy Donating Member 279 Member For: 16y 4m 8d Gender: Male Location: South West Melbourne Posted 27/02/12 10:31 AM Posted 27/02/12 10:31 AM Message me your email and I can send you my instructions for the v2. Should be the same.Ben
RAP1D Member Legacy Donating Member 3,739 Member For: 20y 3m 28d Gender: Male Location: Sydney NSW Posted 29/02/12 03:58 AM Posted 29/02/12 03:58 AM Hey Broadie,Prob a bit late but I've emailed them to you, any dramas just call me 0403981831CheersChris
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now