Clutch Question For T5 And T56

[6speedXR8]

Well at long last we have the option 3 to fit the T5, what we had to do was make a new sandwich plate that is 4 mm thick (this goes between the bellhousing and the engine) and then step the flywheel face closer to the ring gear and it all fits now.

We can now offer the ACE 11'' option 3 to fit the T5 at $1600 and that gives you a New Sandwich Plate, New Billet Steel Flywheel, New 11'' clutch assembly, New alloy CSC, New flywheel bolts and a spigot bearing.

This will be perfect for the guys out there with a T5 and wanting a better clutch while saving for a T56 upgrade. Mal Wood

[MX Dave]

Wish this was available 2 months ago^^^ haha nice job mal!

[josh_hammy]

Well at long last we have the option 3 to fit the T5, what we had to do was make a new sandwich plate that is 4 mm thick (this goes between the bellhousing and the engine) and then step the flywheel face closer to the ring gear and it all fits now.

We can now offer the ACE 11'' option 3 to fit the T5 at $1600 and that gives you a New Sandwich Plate, New Billet Steel Flywheel, New 11'' clutch assembly, New alloy CSC, New flywheel bolts and a spigot bearing.

This will be perfect for the guys out there with a T5 and wanting a better clutch while saving for a T56 upgrade. Mal Wood

This seems like the path I wanna go down ASAP!!! Just a few quick ones.

-How much power is this clutch rated to?

-can you get this kit with the option 3+ clutch? Which I think is good for about 410rwkw??

-if I was to buy this kit, have it installed, then a few months down the track purchase T56 from Malwood, how much $ am I looking at to buy all the gearbox etc?

[OED666]

The Option 3 is rated to hold 350RWKW, and Option 3 Plus 410RWKW. We can supply the Option 3 Plus for the T5 as well, which will be around $1850.

The cost on the T56 upgrade is $3890, for all the components required for the conversion.

http://www.malwoodauto.com.au/index.php?page=ford