Bf Ute Wheel Offset, 13" Wide +15. (Rear)

[g6t]

e-series is bigger offset than au-fg maybe some 1 can on here nows :newrussian:

Edited 29/01/12 07:50 AM by g6t

[Henz]

E series iirc are 0, b series +36. Means e series is 36mm closer to the guards.

[Worm]

He means if you fit e series wheels to a b series... They will stick 3.5cms closer to the guards then standard b series rims...

[bossmang]

so e series rims on an fg then would work? lol

[Scar92]

9.5 + 12 on the front and 10.5 + 15 on the rear can be done, you will have to cut the inner lip on your rear guards though, as long as you feel comfortable going at your car with the makita then that's what you should be looking into

[Scar92]

Also, 12 - 13" will not fit inside the guard of a b series.

[mic]

12 inch wide, 18" and +28 will fit. ill show u soon.

[Worm]

10.5 is the most you'll get "inside" the guard without major modification...

I ran 20x10.5... +30... Cleared inner by a couple of mm and guard sat on the rim... Guards are rolled and pumped...

If you run HELLA FLUSH you may be able to run 12's, however I'm pretty sure +28 will hit inside!!! I would have said 18x12 +8 will work sticking out...

[mic]

im goin +20, it will fit easily. ute remember.

[Worm]

not FG and still has to have inner clearance...