discostig Manual mode ________________________ All day, erryday Legacy Donating Member 13,798 Member For: 18y 9m 25d Gender: Male Location: Probably above atmospheric pressure Posted 04/09/11 12:21 AM Posted 04/09/11 12:21 AM It must be quite a feeling to hammer past another car like in the 8.48 run. Poor XY was bloody fast too!
D1A31 Member 18 Member For: 18y 6m 7d Posted 04/09/11 02:35 AM Posted 04/09/11 02:35 AM Top effort boys the car is moving what was mid track mph and is this car on meth if so good going. Come on Melbourne
IceMyButt Link Member 421 Member For: 22y 3m 16d Gender: Male Location: Sydney Posted 04/09/11 05:32 AM Author Posted 04/09/11 05:32 AM I will post up the timeslip tomorrow when I get to work and scan it in. The car runs on E85.
JETFPV Legacy Donating Member 672 Member For: 18y 10m 13d Gender: Male Posted 04/09/11 09:12 AM Posted 04/09/11 09:12 AM Just a question for you, Who made your extractor's and are you running single or twin gates ?
IceMyButt Link Member 421 Member For: 22y 3m 16d Gender: Male Location: Sydney Posted 04/09/11 09:24 AM Author Posted 04/09/11 09:24 AM My manifold is a custom job made by Speedfab. Unfortunately they finished up the business a little while ago. It is a single gate running Turbosmart 60ml gate.
IceMyButt Link Member 421 Member For: 22y 3m 16d Gender: Male Location: Sydney Posted 04/09/11 09:31 AM Author Posted 04/09/11 09:31 AM Top effort boys the car is moving what was mid track mph and is this car on meth if so good going. Come on Melbourne60 foot was 1.34 and mid track was 132mph. Final trap speed was 165.88 mph. Picked up 33 mph in the second half.
JP300 Legacy Donating Member 842 Member For: 21y 5d Gender: Male Location: Sydney Posted 04/09/11 09:36 AM Posted 04/09/11 09:36 AM Hey that's my tag lie (ha ha)... but you can use it as you've more than earned the right !!I'd love to see the car sometime.
JETFPV Legacy Donating Member 672 Member For: 18y 10m 13d Gender: Male Posted 04/09/11 11:00 AM Posted 04/09/11 11:00 AM My manifold is a custom job made by Speedfab. Unfortunately they finished up the business a little while ago. It is a single gate running Turbosmart 60ml gate.Cheer's for that, Yeah was just asking as I have same turbo combination as your's and im using ETM extractor's with a 60ml Turbosmart gate, was just curious as my turbocharger sit's in nearly identical position as your turbo does...
ALF05T Member 453 Member For: 19y 8m 3d Gender: Male Location: Sydney Posted 04/09/11 01:51 PM Posted 04/09/11 01:51 PM WOW WOW WOW!! The XY looked fast but then your car shot past it like it was standing still. What time did the XY pull 10 something?Must be alot of dollars put into your car, the way it launches is awesome to witness.Good to see the title Back in NSW.
IceMyButt Link Member 421 Member For: 22y 3m 16d Gender: Male Location: Sydney Posted 04/09/11 10:43 PM Author Posted 04/09/11 10:43 PM Cheer's for that, Yeah was just asking as I have same turbo combination as your's and im using ETM extractor's with a 60ml Turbosmart gate, was just curious as my turbocharger sit's in nearly identical position as your turbo does...No worries. My turbo manifold is similar to an ETM one, so I imagine our setups are pretty close.WOW WOW WOW!! The XY looked fast but then your car shot past it like it was standing still. What time did the XY pull 10 something?Must be alot of dollars put into your car, the way it launches is awesome to witness.Good to see the title Back in NSW.Not sure what the XY did and I try really hard not to focus on just how much money has gone into this project :omg: Atleast there has been a good pay-off with reaching the whole goal with the quickest XR6T in the country.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now