Ba Xr6T Oxygen Sensor

[KWIK F6]

From what my tuner has told me I have found out the hard way is that the ebay o2 sensors and not suited to a BF...even though I clarified with the seller on ebay he said they were compatable with my bf f6...WRONG...The only o2 sensors that the BF can run is he genuine one....Sure BA ones will suit but your car will run rough and blow black smoke..Apparently they are different to the BA series..I bought a genuine ford motorcraft one from ebay " genuine BF o2 sensor " but it was to suit a BA They will try sell you a " BF" one on ebay...dont skimp and just buy a genuine one if you have a BF..... I could have bought 2 by now instead of aftermarket ones...

If you have a BA then ebay ones are great..

BF go to ford...Got one today $263..Genuine BF Hego Sensor

[Dush73]

This guy says he has both types, BA & BF. One is a green plug, the other blue.

http://www.ebay.com.au/itm/GENUINE-FORD-FALCON-AU-BA-TRANSIT-4-WIRE-OXYGEN-SENSOR-/370514699355?pt=AU_Car_Parts_Accessories&hash=item564465a45b

Thanks for all the help guys.....found this straight from the BA service manual.

"On I6 engines, there is one Heated Exhaust Gas Oxygen (HEGO) sensor mounted in the exhaust manifold above the engine pipe connection flange. On V8 engines, there are two HEGO sensors, one for each bank, mounted in the engine pipe just below the exhaust manifold."

[helbz]

Just to clarify BF run two sensors as stock and after an edit and get the OEM Ford sensors to be 100% satisfied ? .. Does anyone have a part number for BF sensors ?

Edited 08/06/11 03:34 PM by helbz

[KWIK F6]

This guy says he has both types, BA & BF. One is a green plug, the other blue.

http://www.ebay.com....=item564465a45b

Thanks for all the help guys.....found this straight from the BA service manual.

"On I6 engines, there is one Heated Exhaust Gas Oxygen (HEGO) sensor mounted in the exhaust manifold above the engine pipe connection flange. On V8 engines, there are two HEGO sensors, one for each bank, mounted in the engine pipe just below the exhaust manifold."

Mate I have purchased both green and blue ones from him...And I stipulated before purchase that I needed one for a BF F6....when it arrived it was for a BA...He doesnt do BF ones....They did have fraud sampe don them though / motorcraft.....dont make the same mistake I did 3 times over.....Just buy from fraud if you need a BF one...

[Dush73]

Mate I have purchased both green and blue ones from him...And I stipulated before purchase that I needed one for a BF F6....when it arrived it was for a BA...He doesnt do BF ones....They did have fraud sampe don them though / motorcraft.....dont make the same mistake I did 3 times over.....Just buy from fraud if you need a BF one...

Did you try them out? I'm wondering what the difference is between green & blue plug, other than colour. Mine is BA & the original one is green, so hopefully I should be sweet. I just thought the BF's plug was blue?

[KWIK F6]

My genuine bf one was green when I removed it. My ba ran ok on the eBay plugs. Should be ok for your ba mate. The new bf one I bought from ford was green. Don't know what the colour difference is. Maybe one is Chinese and ones not.