June 12, 201115 yr #21 I have to disagree with it not doing anything.I did it to my FG and it completly changed the subs performance.Night and day difference.
June 12, 201115 yr #22 Maybe it was just that song that made no different it only takes 10 min to do so maybe I'll try it with a different song and see if that dose anything BUT long run I think I'll still change the sub
June 12, 201115 yr #23 I'm going to try again to get it going - if I can get better performance without having to cash out and buy something else I'm in for it, if it has to happen new sub needs to go in - the stock one will only do what it can and im already thinking about ripping it out.
June 12, 201115 yr #25 LOL - rattling like a hamster on smack. Little bits of cardboard shoved in the right places go soooo well.
June 12, 201115 yr #26 Mine was the not used brake lamp cable. The cable was taped down but the fitting was rattling it's head off.And a night and day difference? Something is wrong with your sub. In my experience I'm yet to see that sort of change. Many amplifiers will have a phase switch to change polarity and you would struggle to know if it was changed.I took out my speaker and had a look, it's not that bad a unit. Its not great but better than many cheap branded subs out there. I think the factory amp is crsp,The Aussie dollar is going well, try eBay us for some great 8" subs.. Plenty to choose from that aren't available here.Alpine type R, JL w3 & w7 + more. Good prices too
June 12, 201115 yr #27 Author With mine there is no more banging/poping noise that used to occurr. I can actually turn the bass and EQ up a fair bit more. depending on what im playing the rear vision mirror will vibrate. Worked well for me
June 13, 201115 yr #28 Volume only goes to 35 not an '11' on the dial of ear bleeding reality though...Although I was used to having a sub jammed up against the back of the seat that rattled my spine in half the space of a sedan.
June 13, 201115 yr #29 You need to use a thin screw driver and lift the small clips inside holding the plugs in (I did mine opposite side to wires) BUT don't waist your time dose nothing I was testing the same song changing the wires over from one side to the other and found it did jack s#%t I agree with dre you want better bass by a new submaybe you put the wires back in the same spots?
June 13, 201115 yr #30 I marked the dark blue wire and it's original hole with a marker so I'm sure I tried both ways
Create an account or sign in to comment