Intercooler Install On A N/A

[zayd687]

hey guys

im having a hard time trying to find how to fit the standard intercooler on a n/a ford. Where does the piping go into? I tried fitting the Metal pipe that comes with original piping under the headlight but its a no go?

does anybody have a picture of their stock setup or any advice how the pipes run n where they go to? hopefulyl I dont need to cut the chassis :( any advice is much appreciated on this

[MRO]

Are you serious?

[freeze_dk]

hope not

[shmitt]

Hmmm interesting lol...

[freeze_dk]

fark I cant find the pic im looking for lol.. its got a cooler setup on a n/a civic? 1 side goes to the tb and theres a pod attached to the other outlet of the cooler

[arronm]

hey guys

im having a hard time trying to find how to fit the standard intercooler on a n/a ford. Where does the piping go into? I tried fitting the Metal pipe that comes with original piping under the headlight but its a no go?

does anybody have a picture of their stock setup or any advice how the pipes run n where they go to? hopefulyl I dont need to cut the chassis :( any advice is much appreciated on this

Do you have a turbo or supercharger on your engine, if not just mount the intercooler in the front and dont worry about the hoses.

Edited 21/10/10 01:23 AM by arronm

[tab]

lol...going by previous posts he's doing a conversion you clowns!

[Dirty32]

Pheeeeeeew... !!

[Dillz]

In the boot, better weight distribution.

[zayd687]

lol thanks tabs... haha

im doing the conversion myself, so far im up to the stage of the extractors off and intake and having the piping line up to where the turbo will be sitting. im just not sure about how the standard xr turbos are setup????

hahah cant believe u guys thought im sticking a cooler on a stock car with no boost...... ! =)

so any ideas guys? if not ill run it differently and fabricate my own pipes? but any advice would be quite useful at this point.