4DZILR Donating Members 713 Member For: 15y 3m 16d Gender: Male Location: Sydney - Brighton Le Sands Posted 12/10/10 11:47 PM Share Posted 12/10/10 11:47 PM (edited) If I were you... Process West!!!!S2.2stage 2 intercooler core + cold side intercooler piping + throttle body relocation + under battery cold air intakeIt will set you back around 2K+ But man that's I wouldn't go battery relocation as I believe certain insurance companies will decline claims.. Edited 12/10/10 11:50 PM by 4DZILR Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047192 Share on other sites More sharing options...
DUS12 Member 471 Member For: 17y 10m 16d Posted 12/10/10 11:57 PM Share Posted 12/10/10 11:57 PM process west is proven, alot of big power and quick cars running his stuff including mine,I must be missing something with the nizpro stuff, cause the plenums I have seen of his has casting dags all through them and his coolers are nothing flash either, they obviously work well but nothing on process west.although I know alot of people will yell and scream at me here but I think almost everything that comes from nizpro is overrated and overpricedPEACE Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047194 Share on other sites More sharing options...
our06t Mmmmm......BOOST Member 3,135 Member For: 18y 23d Gender: Male Location: central coast Posted 13/10/10 12:21 AM Share Posted 13/10/10 12:21 AM (edited) Just fitted another stg1 process west to mine ,great bit of gear easy to fit , last one I had was doing 308rwkw through a PW stg1 and plenty left in it, so I'm aiming for 330-340rwkw this time and the stg1 will handle that easily and retains the stock look under the bonnet Edited 13/10/10 12:30 AM by our06t Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047202 Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 11m 25d Gender: Male Location: Melbourne Posted 13/10/10 01:05 AM Share Posted 13/10/10 01:05 AM although I know alot of people will yell and scream at me here but I think almost everything that comes from nizpro is overrated and overpricedPEACE Maybe overrated maybe not but DEFINITELY overpriced. Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047217 Share on other sites More sharing options...
MiKa Donating Members 4,243 Member For: 18y 9m Gender: Male Location: Melbourne, VIC Posted 13/10/10 06:51 AM Share Posted 13/10/10 06:51 AM I just bought a Nizpro cooler.. Second hand so not expensive and for what I'm running probably overkill hehehe Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047269 Share on other sites More sharing options...
juggernaut Member 71 Member For: 15y 11m 12d Posted 13/10/10 07:09 AM Share Posted 13/10/10 07:09 AM I went for the Process West V3.2 kit. Cant speak highly enough of the package. Dealing with Kev is always a pleasure and the product is top notch.In my case, it was no direct bolt-in fitment, as various clearancing issues needed resolution, there was no provision for the factory boost guage sensor, I remade the air cond pipe, made my own battery cables etc, the park light globe is not happy as the new style under the headlight cold side piping doesnt seem to sit right and the driving light similarly gets a bit of a belting on the pipe, but it's all part of the process of modding cars!Gees Glenn your a fussy bugger....its a Ford.....near enough is good enough....not like its a Nissan or anything. Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047280 Share on other sites More sharing options...
Guest Slash Guests Posted 13/10/10 07:13 AM Share Posted 13/10/10 07:13 AM You guys are crazy if you think that the quality of Plazmamans gear is not top notch.Welds and finish of my cooler / plenum are all quality!Id put it up there with PW and Nizpro...^^ This!PW & Plazmaman are the best quality & looking gear, whilst NIZPRO & PW are the best functioning gear imo.Had NIZPRO everything on my F6 & the results were great, but the PW gear I have now produces the same results while looking amazing too Nizpro MkII cooler easily the best available. I have one in great nick, PM if interested.Yea na.Perform great as already stated, but the finish is absolutely horrible process west is proven, alot of big power and quick cars running his stuff including mine,I must be missing something with the nizpro stuff, cause the plenums I have seen of his has casting dags all through them and his coolers are nothing flash either, they obviously work well but nothing on process west.although I know alot of people will yell and scream at me here but I think almost everything that comes from nizpro is overrated and overpricedPEACE Agreed Kent.If the finish of NIZPRO gear was at the standard of PW & PLAZMAMAN, it would be a hard decision as to which one to pick. At the moment though there is only one man that delivers in both the performance & looks categories... Kevin from Process West! Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047284 Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 17y 2m 1d Gender: Male Location: Vic Posted 13/10/10 07:17 AM Share Posted 13/10/10 07:17 AM (edited) Maybe overrated maybe not but DEFINITELY overpriced.whats it cost to get the cooler pulled back off then refitted when/if you get EPA'd?Edit, I prefer the looks of a polished plazmaman 1000hp cooler..mmmmm Edited 13/10/10 07:19 AM by henz Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047286 Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 11m 25d Gender: Male Location: Melbourne Posted 13/10/10 07:38 AM Share Posted 13/10/10 07:38 AM Was that meant to be directed at me? The nizpro one is not EPA friendly if that's what you mean, no matter what they say. Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047297 Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 17y 2m 1d Gender: Male Location: Vic Posted 13/10/10 07:49 AM Share Posted 13/10/10 07:49 AM it will pass an emmisions test with the supplied kit, wont stop ou getting EPAd and not ADR aproved and all that, but doesnt have to be removed for an emmisions test.There stage one style cooler kit was on special for $1500 IIRC not long ago, which seems on par with most others. Also I was looking at one not long ago and the core looks to be 500x500, bigger than most others. Link to comment https://www.fordxr6turbo.com/forum/topic/70963-which-cooler-to-get/page/2/#findComment-1047301 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now