riki83 Legacy Donating Member 384 Member For: 16y 7m 7d Gender: Male Location: Kellyville, Sydney Posted 05/10/10 09:52 AM Posted 05/10/10 09:52 AM Either way one is forsale off my car which chris has. Good price
MexicanBatman G666E Turbo!!! Member 1,008 Member For: 16y 8m 8d Gender: Male Posted 16/11/10 01:57 PM Posted 16/11/10 01:57 PM Riki what were your findings with the hdi2 tuners have told me they are rubbish and I'm better off with the stock fg cooler and just a pipe kit, I already have a hdi kit sitting in the garage but after looking at the instructions it looks like much irreversible cutting needs to be done.... Now I'm not sure what to do!Did you have any issues with pressure drop? I'm told contrary to hdi's claims that there is significant pressure drop etc.... And I should get another cooler... I can't really afford another cooler but I could dig up the cash for the pipe kit, whadda ya reckon?
CHLAXN Legacy Donating Member 932 Member For: 18y 4m 2d Gender: Male Location: north QLD Posted 17/11/10 07:34 AM Posted 17/11/10 07:34 AM yeah mate I found looking at the HDI cooler you have to trim the original cooler mounts off at the top so if you return to stock at some time it will make fitting the original cooler a fair bit harder so that's why I got the process west cooler because it uses original mounts.. pretty sure you have to cut the mounts off as I have seen a few pics of the HDI coolers and they were all missing so this gives you another thing to think about mate.. cheersHDI coolerprocess west cooler on my car
STAINLESS again plz You've changed man.... Legacy Donating Member 8,142 Member For: 15y 8m 28d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 01/01/11 01:27 AM Posted 01/01/11 01:27 AM Does the process west require any trimming?
Dale@CHE Member 52 Member For: 17y 10m 19d Posted 08/01/11 07:00 AM Posted 08/01/11 07:00 AM Riki what were your findings with the hdi2 tuners have told me they are rubbish and I'm better off with the stock fg cooler and just a pipe kit, I already have a hdi kit sitting in the garage but after looking at the instructions it looks like much irreversible cutting needs to be done.... Now I'm not sure what to do!Did you have any issues with pressure drop? I'm told contrary to hdi's claims that there is significant pressure drop etc.... And I should get another cooler... I can't really afford another cooler but I could dig up the cash for the pipe kit, whadda ya reckon?there is nothing wrong with the HDI coolers, they work very well and are great bang for buck.. we have made over 420rwkw no problems at all using them, even there BA/BF kit works great for the $$
ratter Member 6,793 Member For: 20y 3m 28d Gender: Male Location: @ my laptop Posted 17/01/11 01:01 AM Posted 17/01/11 01:01 AM Hey DaleHow much intake temp rise through out the dyno run and what psi?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now