Jump to content

Recommended Posts

  • Member
  • Member For: 18y 29d
  • Gender: Male
  • Location: Sydney
Posted

Just had my car dynoed and made 338.7kw and man does it fly! Just finish these mods on the car.

Rapid Systems V4.5

C4 All billet internals

TCE 3500rpm stall

3.5inch Exhaust

Mods the car already had

80lb Injectors

Valvesprings

Flapper and actuator mods

Processwest surge tank and fuelpump

I would like to thank Chris from Rapid and CV Performance for the work they did on my car

Cheers Brent

  • Replies 25
  • Created
  • Last Reply

Top Posters In This Topic

  • Banned
  • Member For: 17y 2m 2d
  • Gender: Male
  • Location: Aspendale, Vic.
Posted

not bad. how much power is the converter holding back? time to go to the track now eh :)

  • Member
  • Member For: 18y 29d
  • Gender: Male
  • Location: Sydney
Posted

yeah that's what CV said the box and converter suck a far bit of power, I use to own a Turbo 13b RX3 that made 420hp at the wheels and I reckon the falcon is heaps quicker off the line it has just blown me away I reckon on stock rims it would fry them for a good 300 meters easy!

  • Waiting for the 1st N/A 12!
  • Legacy Donating Member
  • Member For: 18y 7m 9d
  • Gender: Male
  • Location: Sydney
Posted

Nice one! I must have a freak of a car I reckon you've got me by 1.5 rwkws but heaps more mods!

I know dyno figures don't equate to real life stuff I.e 1/4 runs but still I ran a 12.5 @ 113 mph with only 262 rwkws on board so maybe my girl is special!

  • Banned
  • Member For: 17y 2m 2d
  • Gender: Male
  • Location: Aspendale, Vic.
Posted (edited)

gotta remember with low power, its easier to put power to the ground lol.

you prob ran a ~1.6 60" with that time veva.

just take it to tthe track acid and you can sort of work out what you can do from there. BAs are good for 1.5-1.6 60" according to the top 25 ba/bf list we have here. then you can sort of determine where your car will sit with a couple runs via your 60" and ET MPH.

Enjoy the times!!!!! cv have heaps of 10 sec cars. Just try it in street trim before going full slicks with front runners :)

Edited by icer
  • Waiting for the 1st N/A 12!
  • Legacy Donating Member
  • Member For: 18y 7m 9d
  • Gender: Male
  • Location: Sydney
Posted

*Beep* did you read my signature? 60ft 2.19!!!

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Legacy Donating Member
  • Member For: 18y 6m
  • Gender: Male
  • Location: Vic
Posted

Veva hes running a 3500rpm stall, would be robbing ash*tload of power.

  • Waiting for the 1st N/A 12!
  • Legacy Donating Member
  • Member For: 18y 7m 9d
  • Gender: Male
  • Location: Sydney
Posted

true dat!

  • flame magnet
  • Legacy Donating Member
  • Member For: 18y 4m 3d
  • Gender: Male
  • Location: adelaide hills- 'race air' central
Posted

I lost 17rwkw when the 3000+ stall and built btr was installed.... :beerchug:

  • Member
  • Member For: 18y 29d
  • Gender: Male
  • Location: Sydney
Posted

Yeah losing a good 20-30rwkw they reckon, just came back from a drive from a standing start not stalling it up just punching it blazed my 245/35/20 tyres for a good 250+ meters easy thru all 3 gears. My dad is had to impress (hot rod builder) he was with me when I did it and he couldnt believe it hahahaha the look on his face was priceless

Next thing on the list a Fully built engine, 6boost manifold and a dirty big f*ck off turbo= 450-500rwkw!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...