Zf 6Th Gear Clunk

[discostig]

I noticed this today on the drive home...but only after reading this thread on lunch break! Thanks a lot guys

[rednose]

I tried everything to make it clunk last night, with 370 @ the wheels and shift pressures adjusted in the tune I thought "Here we go, something else to worry about" but to my surprise all is well. Looking forward to seeing what else can be done to the zf with the tuning software about to be released. Cant wait.

[djextreme]

Mine does exactly the same to, ford told me nothing is wrong and won't change the oil!

But they told me the line pressure on the 5th to 6th change wad high! But still won't do anything! :-S go figure

[kovac]

Mine does it aswell and I found that my tranny mounts were cracked and the tailshaft bush was shagged ford said that this could b thr fault ill find out when I replace it in about 3 weeks time

[FG50T]

Mines started doing this in the past week too. Cruising on the freeway into 6th a slight thud. Thought diff bush might be going.

[Ezz]

I suggest getting the ZF tuned through the new software that's just become available. Got mine tuned last Tuesday @ Bluepower.

Once you've driven a calibrated ZF you'll never go back to STD!

[FG50T]

I don't think it coming from the box though..

[Spoony]

Any updates on this from the affected? Mines still doing it, perhaps even more pronounced now.

[SirFaffer]

this is a hail mary because im a little desperate... but was this ever resolved? (im guessing op and everyone else is long gone, but ive gotta try)/