Dose Pipe What To Watch Out 4

[Bomber]

... we cannot afford to let personal disagreements interfer with the progress of Project Dose.

Stop it Luke - my insides are hurting.

Edited 22/08/11 06:53 AM by HSV R GAY

[MR_FG_09]

Okay threads abit old but just tried a dose pipe on my FG anyone got

Any pics of it done to their FG what do u guys do with the oil breather

Hose that normaly hooks up to crossover .

[chevZ]

Whats the liklihood of overboosting here??

Wouldnt mind running a dose pipe but see a lot of people saying overboosting is a problem.

[Benrogers]

If I put I dose pipe on my fg xr6 will it muck up the computer settings or anything like that ?

[stroller]

no.

[Benrogers]

Wats over boosting?

[Sanctum]

Simple write up on how to make a dose pipe.

1. Take off the factory pipe going from turbo intake to crossover

2. Replace with 90 degree bend aluminum pipe (pro tip, PVC melts and falls apart)

3. Attach pod filter to the end off said pipe

4. Put a screw in the end of the vacuum line and cable tie to secure (vacuum line is the small pipe going to the top of the BOV)

5. Boost it down a street and enjoy the flutter/dose.

Here's a pic of my setup (note when I say PVC melts, I'm talking from experience)

Hey mate Ive relocated my battery into the tray and going to setup dose pipe over where battery was, got all that sorted but what's the go with the hole ya have left in the crossover, from what I've seen everyone just leaves it open/unblocked?