Kyleaussie Member 88 Member For: 14y 1m 25d Posted 22/11/12 10:19 AM Posted 22/11/12 10:19 AM Yeah getting the 14s. And tue bigger valve springs
Kyleaussie Member 88 Member For: 14y 1m 25d Posted 25/11/12 08:34 AM Posted 25/11/12 08:34 AM I really can't decide if I should spend the extra on the 998 rods or just stick with the 698s!! Like always I'll prob get more power hungry later on
XYZ Legacy Donating Member 1,171 Member For: 16y 11m 30d Posted 09/12/12 12:24 PM Posted 09/12/12 12:24 PM 698's rods will be fine
matt_davies_28 Member 14 Member For: 14y 3m 18d Posted 12/01/13 09:47 AM Posted 12/01/13 09:47 AM just about to order a 998gt-a long motor ive read on a few of the pages about the place of people making some pretty respectable power out of these! the question is who has what bits on their car and what power and problems have you encounteredive read some awesome things about brads gear but also seen some horror stories to neither of which worry me to much im just very curious has anybody got these motors to what they are rated at
sexual harrassment panda I see a red door and I want to paint it black Legacy Donating Member 5,919 Member For: 16y 10m 22d Gender: Male Location: Far north queensland Posted 12/01/13 10:59 AM Posted 12/01/13 10:59 AM I have the 698 and making a touch over 500hp at the wheelshad a few issues with the motor, a few oil leaks and a leak from the head gasket now too, valve springs are starting to go soft
A300srt8 Member 507 Member For: 21y 8m 21d Posted 12/01/13 11:43 AM Posted 12/01/13 11:43 AM Atomic engines have so many issues I would touch one with Jets old fella.There not as good as there cracked up to be .TOO much media hype 3
welshy_89 Member 131 Member For: 15y 1m 22d Posted 12/01/13 01:07 PM Posted 12/01/13 01:07 PM With A300, there seemed to be a lot of ppl having dramas with there short and long motors assembled by atomic... From wat I cld gather it seemed to be there assembly and not so much there products themselves... Personally I'd find a good engine builder and go from there... I'm running spool rods and cp pistons with no dramas as of yet.... Sent from my HTC Velocity 4G using Tapatalk 2
xr6t_ute Legacy Donating Member 2,281 Member For: 19y 2m 22d Gender: Male Location: south east suburbs Posted 12/01/13 01:37 PM Posted 12/01/13 01:37 PM (edited) Running in oil was very low when I received my 698 long motor. Oil Leaking from harmonic balancer. Substandard headstuds.Brad from Atomic doesnt build the engines, he outsources the engine builder. Edited 12/01/13 01:39 PM by xr6t_ute
A300srt8 Member 507 Member For: 21y 8m 21d Posted 12/01/13 02:00 PM Posted 12/01/13 02:00 PM yep sound like a common story I got his head stud kit and the head would lift at 25 lbs
welshy_89 Member 131 Member For: 15y 1m 22d Posted 12/01/13 02:03 PM Posted 12/01/13 02:03 PM Aren't the studs that atomic supply just arp headatuds anyway? That too me just means they haven't been torqued correctly or block or head wasn't 100% flat... Sent from my HTC Velocity 4G using Tapatalk 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now