C4 Conversion - What is needed ?

[envyxr]

I wasnt sure where to post this question as there are many different topics that are involved.I am thinking of changing my Ba mkII from a six speed manual to a C4.The list of things I need to consider is quite large ,I think I need the following- tourque converter

bellhousing

transmission

adapter for bellhousing?

crossmember

yolk & tailshaft ?

remove clutch pedal

linkages or cable & shifter

Ecu?- not sure what mods this needs

auto console

Does anyone know if I will need anything else or have any ideas of this swap I would be very happy to hear any If some else has done this conversion .The reason for this is that I am going to be chasing 750rwhp + nos and I think that this will be the best conversion to handle the horsepower,as I am wanting a 10 sec car.

[ZAP]

I edited the topic title to make more sense of what you want.

Have a search around as a few people have done this conversion and discussed it on this site.

[blkf6]

hey mate with the ecu side of things there is an option in capa flash tune and any other aftermarket ecu which allows u to disable the auto altogether, this tricks the engine into thinking theres no electronic auto running and c4/9/10 etc are all manualised and doesnt rely on a ecu reading..........

hope that helps

[millzy555]

I too would be interested in this, swapping out the 6sp manual for an auto of some sort, although the hassle and $$ might sway me against doing such a thing

[turbo ute79]

mate I just put a post up about the same thing but I didnt realise you alreay had. have a six speed and looking to go for a c4 but only just looking into it at this stage, it will be a couple of months away at least.