xr6t ego Member 1,112 Member For: 19y 9m Gender: Male Location: PERTH WA Posted 30/10/09 03:14 PM Posted 30/10/09 03:14 PM As the heading says, I'm after a tail shaft loop for my car. I've seen a couple already, but they all look a little dodgy and backyardish. Now I know its under the car and nobody will see it, but the ones I've seen look sh1t and just hammered into place with a few nuts and bolts.Does anyone know of a place that make them and who have placed some thought into their design?Cheers for the help.
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Legacy Donating Member 1,808 Member For: 17y 9m 8d Gender: Male Posted 31/10/09 03:38 AM Posted 31/10/09 03:38 AM www.tweakit.net can get you one, I was going to get one on my ke20.
ETM Member 1,194 Member For: 19y 6m 11d Gender: Male Location: syd south Posted 31/10/09 04:41 AM Posted 31/10/09 04:41 AM I have put some thought into the design of tailshaft loops into xr6 turbos. I use a 360 degree chromoly loop which is welded into place in the transmission tunnel and has been andra approved. They weigh next to nothing and can be fitted in under an hour unlike the bulky bolt in generic versions out there.If you would like more info send me a pm and I will be more than happy to help you out.
gregor Member 459 Member For: 18y 1m 3d Posted 31/10/09 05:55 AM Posted 31/10/09 05:55 AM I was just thinking about these. Do you need it if you run under 12.0 at a street meet or is it only for ANDRA competitions?
ETM Member 1,194 Member For: 19y 6m 11d Gender: Male Location: syd south Posted 31/10/09 10:47 PM Posted 31/10/09 10:47 PM The andra rule book says anything under 13.0. Section 4.2.4
whistler6 Member 417 Member For: 19y 26d Gender: Male Location: VIC Posted 31/10/09 11:06 PM Posted 31/10/09 11:06 PM How much do your tailshaft loops cost?And what do they do exactly??
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Legacy Donating Member 1,808 Member For: 17y 9m 8d Gender: Male Posted 31/10/09 11:22 PM Posted 31/10/09 11:22 PM imagine what happens if you tailshaft breaks off at the gearbox end...
Buf-Phoon loitering with intent Legacy Donating Member 13,318 Member For: 23y 1m 5d Gender: Male Location: Zombie Birdhouse Posted 01/11/09 04:13 AM Posted 01/11/09 04:13 AM @ 120+ mph
tray_182005 Member 1,226 Member For: 17y 1m 17d Gender: Male Location: Wee Waa/NSW Posted 01/11/09 06:57 AM Posted 01/11/09 06:57 AM How much do your tailshaft loops cost?And what do they do exactly??
BarKer Member 174 Member For: 17y 6d Gender: Male Location: Newcastle Posted 01/11/09 09:01 AM Posted 01/11/09 09:01 AM If I may...A tailshaft loop is just a metal bracket or loops which is located around the tailshaft (gearbox end) to prevent it from dropping and hitting the ground if the front universal joint, yoke or the shaft itself fails and breaks.. this is to prevent the shaft spearing into the ground and attempting to pole vault the rear of the car, which normally does a poo-load of damage... It only has to support the weight of the tailshaft and really, they are a pretty basic and simple item..In the old days we used to make them ourselves from some flat steel. However, those days are gone so now we pay someone to make one and put a sticker on it with the inevitable "performance" stamped on it somewhere..
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now