Grizzlyf6 Cracks A 10!

[FSIX]

I would be lying if I said I wasn't trying to give that 10.80 full weight record of yours a little scare..........still a ways to go there but.

You have the 60 foot , you have a good tuner who knows his racing so it will come.

Dave knows how to get the ZF boosting of the line, it was his knowledge that enabled us all to get these tanks of the line.

You guys also seem to have a very good start-line the consistent low 60 foot times you guys are getting in NQ are nothing short of brilliant for full weight cars.

[XRMATE]

Well done, youve been hangin for that 10 for a while now. looks like youve got the 60 ft all worked out to.

[gregor]

Good work. I love how these cars can go so fast with a relatively moderate level of modification! Your mod list is almost identical to what I've been considering.

[PSYCHO XRT]

Well done mate, that's one quick car.

[R-SPEC]

Congrats mate. What's next...?

[CSV_LS1]

Well done mate. Good to see another F6 in the 10's.

[GrizzlyF6]

Well done, youve been hangin for that 10 for a while now. looks like youve got the 60 ft all worked out to.

Thanks, that car of yours was going pretty hard too not too far to go before you hit the 10's

Congrats mate. What's next...?

Not really sure we have a night time test and tune coming up soon so might try the same set up then and see how it goes. Wouldn't mind seeing how a larger turbo would go on it either.

Well done mate. Good to see another F6 in the 10's.

Thanks I'm really happy with the car, the runs felt easy and didn't seem to be hurting the car too much. Hopefully more to come.

[jaymen]

Is that 10 sec time with stock Actutor, wastegate & porting????

Congrats mate well done F#$k these turbo 6's go quick with little mods!!!!

[GrizzlyF6]

Is that 10 sec time with stock Actutor, wastegate & porting????

Congrats mate well done F#$k these turbo 6's go quick with little mods!!!!

Ahh bugger forgot that!! 12psi actuator stock flapper with a little porting done.

[blueboost]

Is that 10 sec time with stock Actutor, wastegate & porting????

Congrats mate well done F#$k these turbo 6's go quick with little mods!!!!

his car has a 9psi actuator, standed flap, waste gate hole tidied up with the die grinder to make sure it does not over boost.

what he ment by stock turbo, is stock size, and no mods to compressor or turbine housing to make the turbo flow more, that might be his next mod, if he wants to run tens on 98 fuel.

David