richdave SLOJAM, Gone but not forgotten Legacy Donating Member 1,841 Member For: 23y 11m 20d Gender: Male Location: Outer east - Melbourne Posted 22/08/03 10:15 AM Author Posted 22/08/03 10:15 AM Double twins look ok (abit square), but the ricer tail lamps spoil a good rear end and the tailgate seemed to be dead flat with all badges removed... Top looking car and individual I guess but dang those tail lamps look ordinary! Each to their own I guess.
240 T Member 335 Member For: 23y 5m 24d Gender: Male Location: Mexico Posted 22/08/03 10:31 AM Posted 22/08/03 10:31 AM If you mean a exaust outlet on each side of the rear bumper I would like to know more dads been dreaming for a new car to come out with that so getting it done wouldn't consern him do you know if this can be done to XR8 sedan.?????
240 T Member 335 Member For: 23y 5m 24d Gender: Male Location: Mexico Posted 22/08/03 10:31 AM Posted 22/08/03 10:31 AM Also xr8 in pic looks the goods
GOLDIE My new toy Legacy Donating Member 5,344 Member For: 23y 5m 8d Gender: Male Location: stanthorpe wine capital of qld. Posted 22/08/03 09:18 PM Posted 22/08/03 09:18 PM There is an xr8 sedan on the gold coast with twin pipes on both sides it belongs to an exhaust shop I think.
Guest boss260ute Guests Posted 04/09/03 08:53 AM Posted 04/09/03 08:53 AM Heres a better pic of the twin setup on my ute
Charliewool Member 375 Member For: 23y 8m 8d Location: Melbourne Posted 04/09/03 09:32 PM Posted 04/09/03 09:32 PM Boss 260... Do the pipes still run down the R/H side of the vehicle? (to avoid fuel tank) & do you still have spare wheel in its place? Also interested to know where the L/H pipe actually goes over rear axle?... One more?.. Who did the rear bar mods?... BTW Looks awesome! ( definately where I'm heading!) Regards Charlie
Guest boss260ute Guests Posted 07/09/03 09:15 PM Posted 07/09/03 09:15 PM Twin 2.5 inche down drivers side over axle, one goes straight out to drivers side, one then bends to passenger side then out. Running twin genie barrell type muffers so no room for spare.The rear bar was done by my panel beater. It was just a fluke he had a rear apron that was damaged, but the exhaust cut out was intact. He cut the exhaust template from the damaged bar, cut a hole in mine & plastic welded it in. Looks the goods underneath as well. Nice & factory. Cheers.
Cobra potty trained Legacy Donating Member 1,938 Member For: 23y 5m 5d Gender: Male Posted 07/09/03 11:31 PM Posted 07/09/03 11:31 PM good to see an example of what FORD should have done in the first place
Charliewool Member 375 Member For: 23y 8m 8d Location: Melbourne Posted 08/09/03 01:16 PM Posted 08/09/03 01:16 PM Twin 2.5 inche down drivers side over axle, one goes straight out to drivers side, one then bends to passenger side then out. Running twin genie barrell type muffers so no room for spare.The rear bar was done by my panel beater. It was just a fluke he had a rear apron that was damaged, but the exhaust cut out was intact. He cut the exhaust template from the damaged bar, cut a hole in mine & plastic welded it in. Looks the goods underneath as well. Nice & factory. Cheers. As you probably realise the pursuit lower bar is removable ( different to XR).. I plan on making a mould for a new one with twin cutouts, & I reckon you have room for the 2 mufflers BEFORE you go over the axle ( big cavity on R/H side).. I also think I can fit the L/H pipe between the spare & the leaf.... will keep you posted on this....... Regards Charlie
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now