Hey guys.... Just found this while looking for a new dizzy for my Clevo.. Looks promising.. It certainly has potential if it is compatible with our Ems. Looks like it's

$309. Which I presume is US dollars. Anyway..... HAve a look for yourself...

http://www.fordmuscle.com/archives/2007/05...hHawk/index.php

http://www.shopatron.com/product/product_i...424.0.0.0.0.0.0

mmmmm now that looks interesting

Group buy

I have not seen one of these type of units yet that works with the fly by wire throttle to show absolute throttle position. Most of the other things work though.

Don't want to rain on anyone's parade but they don't work with our falcon's, althought they do look like a nice bit of gear for the $$$.

Nice product but it will only work with the "CAN BUS" 2 Wire system. Tried it on the Chyrsler 300C and it works great.

http://www.dashhawk.com

Edited June 27, 200719 yr by bafpvgt

yeah I was going to say the can bus thingo I think zap knows the deal

Why won't it work on our cars?

That device works on CANbus, and uses as physical layer standard RS-485 based differential signalling communications, and as protocol supports CAN 1.0b.

It may not support all our PID's, but the standard SAE-Pids will be supported, things like RPM, Speed, MAP/MAF and a few other sensors.

Have fun.

Just tested the MSD Dashhawk with the BA-BF Falcon and unforntually, it is not compatable with the Falcon. Hooked it up to a 6 cyl Falcon Auto, a 5.4L V8 Falcon Ute Auto and a 5.4L V8 XT Falcon Manual with no results. No harm in trying.....