Jump to content

Recommended Posts

  • www.australianflag.org.au
  • Legacy Donating Member
  • Member For: 21y 2m 3d
  • Gender: Male
  • Location: Brisbane
Posted

Where do you buy Transmax Z in Brisy, and where can I get it changed?

I would like to do it tommorrow, I know it is a long shot, otherwise I will buy some and hit up Goldie.

Scotty

  • www.australianflag.org.au
  • Legacy Donating Member
  • Member For: 21y 2m 3d
  • Gender: Male
  • Location: Brisbane
Posted

I will try both Supercheap and Autobarn in the morning.

Scotty

How hard is it to do yourself?

  • Legacy Donating Member
  • Member For: 20y 6m
Posted
Where do you buy Transmax Z in Brisy, and where can I get it changed?

I would like to do it tommorrow, I know it is a long shot, otherwise I will buy some and hit up Goldie.

Scotty

After seeing those photos you I dont think Ian would mind you hitting on him :roflmbo:

  • Member
  • Member For: 20y 2m 17d
Posted

Get the car on to 4 stands so you can get under it.

I made this filling tool a few years ago at work. Put the oil in, screw the top on and use compressed air. A bike pump will do :roflmbo:

You also need a 3/8 drive for the plugs.

post-9091-1164356274_thumb.jpg

post-9091-1164356295_thumb.jpg

  • www.australianflag.org.au
  • Legacy Donating Member
  • Member For: 21y 2m 3d
  • Gender: Male
  • Location: Brisbane
Posted

I will look at getting a mate to make up one of these out of an old Gas bottle. But until then I will just use a bloody big syringe.

The only question I know have is, the reverse light, how does it work, as I would hate to screw it in to far and not gbe able to select reverse, or not screw it in enough and not have reverse lights.

Hopefully the T is more high tech and this will not be an issue.

Scotty

  • Member
  • Member For: 20y 20d
  • Gender: Male
  • Location: Brisbane
Posted (edited)
Get the car on to 4 stands so you can get under it.

I made this filling tool a few years ago at work. Put the oil in, screw the top on and use compressed air. A bike pump will do :roflmbo:

You also need a 3/8 drive for the plugs.

If you fill them from the so called filler plug you WONT get enough oil into your gearbox. You need to put in 4 litres and you can only do it from the speedo drive.

http://www.fordxr6turbo.com/forum/index.ph...e=post&id=26103

Edited by Paul@eliteauto
  • BOOST
  • Moderating Team
  • Member For: 23y 15d
  • Gender: Male
  • Location: Southern Highlands NSW
Posted

Sorry to add

But I had mine done today and it took ALL 4 Litres through the fill plug

  • Member
  • Member For: 20y 2m 17d
Posted
I will look at getting a mate to make up one of these out of an old Gas bottle. But until then I will just use a bloody big syringe.

The only question I know have is, the reverse light, how does it work, as I would hate to screw it in to far and not gbe able to select reverse, or not screw it in enough and not have reverse lights.

Hopefully the T is more high tech and this will not be an issue.

Scotty

Re how much oil.

This man should know !

http://www.fordxr6turbo.com/forum/index.ph...ndpost&p=468300

I also use only 4 litres ! 937

  • www.australianflag.org.au
  • Legacy Donating Member
  • Member For: 21y 2m 3d
  • Gender: Male
  • Location: Brisbane
Posted

Dont worry I fully intend to only put 4 litres in. Wheteher it goes in thropugh the fill plug, or the reverse switch. I will find out tommorrow when I am under the car.

Scotty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...