Jump to content

Recommended Posts

  • Legacy Donating Member
  • Member For: 22y 11m 24d
  • Location: Sydney
Posted

Hi All, Just picked the "T" up from local dealer after some warranty work and have just noted on the job docket, 2 recall campaigns listed as follows.

PRGC264 & PROG309 "Carried out recall tested OK". Any ideas what these are. I was late picking the car up and did not get any details. Will call them tomorrow & post answers unless someone knows about them. :wavey:

  • Replies 37
  • Created
  • Last Reply

Top Posters In This Topic

  • Member
  • Member For: 21y 10m 19d
  • Gender: Male
  • Location: Adelaide
Posted

Had the car serviced yesterday they said the turbo had to be inspected and the overboost flash update installed

  • Legacy Donating Member
  • Member For: 22y 11m 24d
  • Location: Sydney
Posted

Does the overboost update have any effect on edit ?

  • Legacy Donating Member
  • Member For: 21y 8m 1d
Posted
Does the overboost update have any effect on edit ?

No.

You flash your map straight back in. :blush:

I was under the impression that when the dealer fixes the overboost problem he flashes the ECU. WHich means he has overwritten the edit you had.

Sure enough you can flash your edit back in but the overboost problem will also be flashed back exactly as it was before.

  • Member
  • Member For: 21y 9m 17d
  • Gender: Male
  • Location: Gold Coast
Posted
Does the overboost update have any effect on edit ?

<{POST_SNAPBACK}>

No.

You flash your map straight back in. :blush:

<{POST_SNAPBACK}>

I was under the impression that when the dealer fixes the overboost problem he flashes the ECU. WHich means he has overwritten the edit you had.

Sure enough you can flash your edit back in but the overboost problem will also be flashed back exactly as it was before.

<{POST_SNAPBACK}>

Except that the Edit doesnt have 'Overboost' problems in the first place. Its designed to Overboost :fool:

You should ALWAYS flash back your Edit'd car to Factory before ANY Ford Factory Service, just cause u can :blush:

Then boost her up when you get it back.

  • No boost, no bottle, just my foot on the throttle!
  • Legacy Donating Member
  • Member For: 22y 7m 19d
  • Gender: Male
  • Location: Sydney
Posted

The only problem is the Factory tune in your edit will not be the same as the factory in the ECU. Apparently you need to send the unit back to CAPA to be wiped. If you put your old factory tune back intot he car you will be flashing the pre overboost map and the next time Ford flash the ECU, they will see it is running an older version and know it has been edited

  • Member
  • Member For: 21y 6m 9d
  • Gender: Male
  • Location: New Zealand
Posted

Are you sure about that?

I was under the understanding that the new map from Ford gets loaded back into the Standard slot when you load your modded tune into the car?

Guest FatBAt
  • Guests
Posted
The only problem is the Factory tune in your edit will not be the same as the factory in the ECU.  Apparently you need to send the unit back to CAPA to be wiped.  If you put your old factory tune back intot he car you will be flashing the pre overboost map and the next time Ford flash the ECU, they will see it is running an older version and know it has been edited

<{POST_SNAPBACK}>

Actually that is a very good point. If they see an old version in your car that they know they have already flashed, you will have some explaining to do. :sleepystuff: I'll bet that's why they flash yer car to fix so called problems....just to keep an eye on you.

Oh well, my warranty is almost up anyways....

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...