Jump to content

Looking For Sum1 With A Blower In Their Xt


Recommended Posts

  • Member
  • Member For: 20y 4m 15d
  • Gender: Male
  • Location: Gold Coast
hey guys, I know this is a turbo forum and all but I was just wondering if anyone here has put a blower on a N/A 6 or XT, as im planning on doing so and am curious on any info they amy have.

cheers.

<{POST_SNAPBACK}>

Welcome Buddy.

Not sure why you would want to Supercharge the N/A, when the technology and knowhow to Absolutely get the best from a Turbo is at your fingertips.

Would probably cost twice as much to get half as much performance gain.

Never know, someone probably has done it, just cause they can.

  • Member
  • Member For: 20y 11m 3d
  • Location: Mildura

CAPA make kits for them. You can buy a new xr6turbo long motor cheaper than the kits I've seen.

New Motor = $5200 + Edit with boost maps = $6500

Or check the auto salvage joints. Plenty of T's being pranged so should'nt be to hard to find a low km second hand one.

Last time I looked at the CAPA site S/C started around the $7000 then you would need the Edit to make it work properly. $8300. plus fitting and custom tune

You can buy some pretty good mods for $2000 if you shop around. :spoton:

macka

  • Donating Members
  • Member For: 21y 5m 24d
  • Gender: Not Telling
  • Location: next door..

dont waste time with a blower man, unless u got a wheelbarrow full of cash and want to be different.. turbo would be cheaper and power gains are much easier..

  • Donating Members
  • Member For: 21y 7m 27d
  • Gender: Male
  • Location: Townsville

I had one on my AU 6 with auto. It was the Capa powerdyne unit with 9psi and water injection, the car made 175rwkw which was good back in 2000 and made a huge difference to the cars driveability especially overtaking. I fitted the kit with 7000km on the clock and sold it with 55,000km on it and didn't miss a beat once. I only wished I had put a 2500rpm stall converter or had a manual as it is basically stock feeling until 2500rpm.

I would choose Procharger also as the Vortech they sell do run hot and would benefit from a intercooler over 6psi.

Either way you go you wont be disappointed and each to there own.

Brett.

  • Member
  • Member For: 20y 11m 3d
  • Location: Mildura

I had the same idea about 8 months ago. I decided against it because it was a lot of money to pay for that S/C sound. If I had that wheel barrow of cash, I'd still do it though, just because I could.

If that;s what you want, then go for it I say :useless:

macka

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'