Another Intercooler Option

[Adam]

Does anyone know what the go is with Nick's cooler?

Is anyone using it yet?

What were the results?

I've had a look on his forum but there's to much sh!t to sort through to get to the real information.

[Guest]

Does anyone know what the go is with Nick's cooler?

Is anyone using it yet?

What were the results?

I've had a look on his forum but there's to much sh!t to sort through to get to the real information.

<{POST_SNAPBACK}>

4 being fitted in qld this week end for forum members and I'm sure it will be posted up soon enough!!!

quoted from 1st post

Some of you have requested information about the intercooler I have ordered, so here it is.

- It's a bar and plate core made in Japan.

- The size is 450 x 300 x 80

When tested on a modified T, power increased from approx 270RWKW to approx 290RWKW with just the cooler swap. The car was checked by 3 back-to-back runs and intake temps were recorded from the cars diagnostics (20C ambient):

Temp standard cooler

1st run 80 deg f - (26.67C)

2nd run 95 deg f - (35C)

3rd run 123 deg f - (50.56C)

Temp new cooler

1st run 70 deg f - (21.11C)

2nd run 78 deg f - (25.56C)

3rd run 84 deg f - (28.89C)

As mentioned, runs done consecutively with the temp taken from the scanner.

- The unit comes with the brackets required for mounting to the front of the T.

- Only need to move the horn and some hoses.

- The supplier can fit for $100 (Melbourne)

ps I'm the suplier!!!

[Adam]

So Nick,

You can either sell me an exhaust or an intercooler.

Which one would be the better option?

From all the stuff I've read over my past 2 sick days seems to suggests the cooler would be the better option at the moment.

[Guest]

So Nick,

You can either sell me an exhaust or an intercooler.

Which one would be the better option?

From all the stuff I've read over my past 2 sick days seems to suggests the cooler would be the better option at the moment.

<{POST_SNAPBACK}>

yep I agree!!!

[Adam]

Good stuff Nick!

Do they come in black? And how much?

[Street Tuner]

Nick, having spent extensive periods of time in Japan, and knowing major core manufacturers there eg Calsonic, Ueto etc. I can suggest that this is not in fact a Japanese product. However I may be wrong

This looks very similar to the NissanSilvia.com $160 to your door Chinese thing with a cut and shut end tank....

[Adam]

Don't try and discredit his product without the proof Martin!

[jetute]

ST.... whats up your nose??? shooting down DW on two diffrent threads???? way to go champ

[Guest]

Nick, having spent extensive periods of time in Japan, and knowing major core manufacturers there eg Calsonic, Ueto etc. I can suggest that this is not in fact a Japanese product. However I may be wrong

This looks very similar to the NissanSilvia.com $160 to your door Chinese thing with a cut and shut end tank....

<{POST_SNAPBACK}>

TUNER WHAT IS UP YOUR ANUS?

ARE YOU SCARED OF SOMETHING?

HEY SAY WHAT YOU WILL BUT WE ALL KNOW ITS UNFOUNDED AND YOUR JUST BLOWING OFF STEAM!!!

SERIOUSLY WHY THE ATACKS?

DID I SAY SOMTHING BAD AGAINST YOU OR HPF READ MY POSTS IVE COMENDED THEM NOT ANYTHING ELSE!

MAYBE YOU THINK I'M TRYING TO STEAL CRAIG FROM THEM?

IF SO ASK CRAIG MY WORD HAVE ALWAYS BEEN STICK WITH THEM TILL THEY CANT HELP YOU ANYMORE!!!

SO AN APOLOGY WON'T GO ASTRAY!!!!

[Street Tuner]

No attack. No apology. Its just obvious from your picture that a generic intercooler has been used with one end tank cut in half turned upside down and tacked back into place. It wasnt an attack, it was a question...and in all my time spent in Japan I have never seen a core like that. Nothing more to it, dont be so paranoid.