Jump to content

slygary

Member
  • Posts

    31
  • Joined

  • Last visited

Everything posted by slygary

  1. I gave the springs a proper measure and the right hand is 19mm higher than the left hand spring. So I gave king springs a call and they said it is ok but they are usually 15mm difference and the size difference is not for the compensation for the driver, just the way the car is designed. And by the way the fuel tank is on the passenger side.
  2. Got my springs this week to lower my fg xr6t ute and I got the king springs leaf springs FOR-303 and the right hand is 20 - 25mm higher than the left hand spring. I know there should be a slight difference between L/H & R/H. Is that ok or normal ?
  3. I just put one in my fg mkII, I put 4 washers in it and cap is screwed down half way leaving room for adjustment either way.
  4. Have a look at the pinned turbosmart bov thread above this one
  5. I installed mine today. I had to unscrew and swap over the pipe and trumpet for it to fit 100%. Mine came with a little cd to put in the computer and if you read the install and adjust insructions on how to set it up you cant go wrong. I had to install 4 shims for it to have good movement of adjustment.
×
  • Create New...
'