citric_XR6Turbo

Do you recommend them ?

who tuned your Ute HenZ???

The him module does not need to be programmed for the car to start even if it's not plugged in the car will still start. I've had dash's just sitting in the car with only the kick panel plugs and "BEM" plugged in and I was still able to move the car off the hoist . It thew alot of coeds but still drives mate . And it sounds like you have a big issue inside the motor from the impact man. You should be able to turn it over with a 1/2 inch breaker bar with ease man being a turbo motor .

were are you from mate ?

Pauly is 2256 your tech number ? Mine is 8161 lol

lol just went on that FB page and F&%K there is some UGLY aftermarket rims lol

you should share your knowledge about this flow rate JETSNOT

I didnt think it was a F6 it has been molested a bit though with the xr8 bonnet and tail lights tinted and sh*t

is that a Black FG f6 with tinted rear lights ?? if so I also seen it on the deer park Bypass

BA XR6 Turbo ute No motor and no hard lid and he still wants $12,000 is this guy serious ??? http://www.ebay.com.au/itm/FORD-BA-XR6-TURBO-UTE-NO-MOTOR-NO-HARDLID-/150878690685?pt=AU_Cars&hash=item2321121d7d#ht_500wt_1414

Hey Guys just wanting to know if anyone is running a Odyssey Battery with there plazmaman Boxed Intake ?? Just need the Part Number or Battery Model Cheers Guys

I agree with GTEXXED send it back, or at-least find out why they changed the design ?

I just ordered it thew work man not shore of the name of the exhaust place we go thew but I can find out for you ?

I Have a Full Xforce system 4inch dump, 3.5inch Cat and 3.5inch cat back for $1520

Here is a photo of my plazmaman intake the ports are also Side by side , if you just brought yours maybe They have changed there product design?

that's why you get a Ute mate. Solid rear for the win never need to worry about diff bush's lol

Hey" Flameon why don't you put some information up about yourself ? every one is calling you a cop witch I'm guessing you are ..if not what car do you drive? any mods Ext; .Maybe a Display picture? were all friendly people here mate don't be shy lol

Needs a wash under the engine bay mate then it will look alot better lol

just had a look at the Top plate and your correct it is a plazmaman lol I swore I seen process west same sh*t though I guess

when I brought the process west stuff he thew in a 12psi actuator and what do you mean by modded bigger flapper ? .and I don't know how much to run prob 12-14 psi I was thinking but il let the tuner go thew every thing and see how it goes . My fathers mate has is own shop (CK automotive) at Maribyrnong in Victoria and he tunes VL turbos and Xr turbos so im just going to go to him and see how it does on the dyno I guess

Yer I know they have a week bottom end when it blows up il just go bigger and better but untill then just have some fun and with the valve springs has any one bought them from crow or nizpro just so I know im buying good springs not sh*t ones that will cause problems later on when tuning

ow ok I spoke to the roadworthy guy at work and he said it was fine but there u go and about the valve springs and injectors any info ?

being a ute I did not want to put it in the tub because it will just get in my way .. ive seen photos of people putting it under there R/H head light in front of the inner guard liner...but I was thinking behind the drivers seat was ok its still roadworthy as long as it is boxed and secure.

yer im thinking about putting the battery behind my drivers seat but dont know yet I loose my licence for 6 months as of the 1st of September so all the work will be done then lol

ow ok I can change it to the 3.5 inch one its thew work so il just get the other one credited and get the 3.5 exhaust in .