Ross23

Hi, I have a FG G6e turbo and want to know if its a good idea to replace the oem turbo oil feed line with something like this: http://www.ebay.com.au/itm/AEROFLOW-FORD-XR6-TURBO-BA-BF-FG-FPV-TERRITORY-F6-UTE-OIL-LINE-KIT-AF30-1000/131088208802?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140106155344%26meid%3D8833322365018883540%26pid%3D100005%26prg%3D20140106155344%26rk%3D3%26rkt%3D6%26sd%3D181191281689&rt=nc Or is the oem pretty safe? Cheers, Ross.

Here's the new G6E http://www.motoring.com.au/news/large-passenger/ford/falcon/fancy-new-ford-falcon-g6e-unveiled-44998

Monsta Torque recommend option 2 and keep the standard air box. I'm looking at getting around 300rwkw.

Hi Guys, I need some advice on the following upgrade options for my G6e turbo Option 1: Herrod CAI Herrod Piping Kit Venom FG Turbo Cat pipe Injectors Cooler thermostat Plus tuned by Monsta Torque Option 2: Process West stage 1 cooler kit Venom FG Turbo Cat pipe Injectors Cooler thermostat Plus tuned by Monsta Torque Not sure which option to go with. I'd appreciate some advice which option is best. Cheers, Ross.

I'd be keen for stage 1 kit depending on price.

Go to Monsta Torque or Xtreme Ford Tuning they'll both look after you.

With e85 can you put this in a stock FG G6e turbo or do you need a tune?

Hi Guys, I was driving my car today and when I braked the DCS and ABS light up on my dash. It didn't go away until I turned the car off and on again. I was doing some research and some people say it could be a faulty brake pedal switch. I was looking on ebay and was wondering if someone can tell me if this is it: http://www.ebay.com.au/itm/GENUINE-FORD-BF-MK3-FG-MK2-FALCON-SY2-SZ-TERRITORY-BRAKE-LIGHT-SWITCH-0508-/290833181444?_trksid=p2054897.l4275 Also can someone send me some instructions on how to change it? Cheers, Ross.

Take me out as I have already got mine. Couldn't wait :)

Thanks Kal89.

Why?

What about King Wheels Matrix Black?

Hi Guys, Does anyone know the make of these wheels? I'm looking at getting them for my G6e Turbo. Cheers.

Yes Masda74

I'd be interested too.   2009 G6e turbo with dba T2 slotted rotors and QFM HPX pads. Everything else is stock.

Hi Guys, I want to buy braided lines for my 2009 G6e Turbo. Does anyone know where I can buy these from? Anywhere in Perth? Thanks.

Hi, I have a 2009 G6e turbo stock and love the way it drives. I'm looking at getting the Xtreme Ford Tuning full stage 1 done to the car in the near future but want to know from people who've modded their cars does it still drive nice or does it feel different?

Madz, What do you think of this setup then: Front Brake Rotors - DBA 4504S T3 Clubspec 4000 Series Slotted Rotor Rear Brake Rotors - DBA 505S Street Series T2 Slotted Brake Rotor Heavy duty bendix pads are these dusty? Any other good pads out there that's not dusty?

Fadz, I'm after a little street fun and nothing else. I might be considering bigger injectors and a tune later down the track and that's it. I don't want a dusty pad just something that's clean and quiet. Yes I like to keep my car clean.

HI Guys, I'm looking at upgrading my front and rear rotors with the following: Front Brake Rotors - DBA 504S Street Series T2 Slotted Brake Rotor Rear Brake Rotors - DBA 505S Street Series T2 Slotted Brake Rotor I have a 2009 G6e Turbo and was wondering if these will be worth the upgrade over the stock rotors? I'm not taking my car down the drags or anything like that. I'm just looking for a basic upgrade over the stock rotors. Thanks.

Thanks Pazzo. I'm in WA so probably looking at ordering online. Not sure if any of the above company's would ship them over here. I'll ask some local shops over here and see if any of them can supply and fit them for me.

Why not? Have you heard bad things about fdo?

Hi, I'm looking at ordering some Vossen CV3 wheels from fdo.com.au but wondering if their any good. Can anyone let me know if they recommend them. Thanks.

With the Plazmaman FG OEM Style Pod Filter/Air Box Intake kit does anyone know if the pipe still rubs on the bonnet for a FG g6e turbo? I've read that some people had problems with it rubbing in the BF's but I'm not sure if this is the case for the FG's.

Have you got the link for the Herrod?