liontamer2

My ute runs constant 12.8's fitted a Trans Mod 12.3's best $85.00 ever spent

The ute ran a PB tonight at Willowbank,still pumped, F.I.S.T have done it again after fitting a Trans Module shaved over half a second of my time,bloody 12.30 still Thanks AL at F.I.S.T

forgot to say that I put in a maual button so can give a few squirts before take offfffffffff

Well done FPVT6 same time as liontamer 12.86 but mines doing 116 mph might get Jeff to give mine a squrit ....Greg

I myself plumbed in another window washer pump into the washer bottle,used a 4psi Hobbs pressure switch (p/n sw p 76583/4) $32.00 a small garden sprinkler,small lcd light wala $50.00 works a treat Greg

Hi, just bump it forward with the palm of your hand then push the plastic pin out refit the sinker back in the handle replace the spring and plastic pin,pratice makes perfect as have done it a few times now only 5 minutes to fix,new ones cost $28.00 cable and all,sh*t plastic

Hi FPVT6, a few more shinny bit might be the go,looks bloody good though,Al at F.I.S.T comes up with some good ideas eh. will be getting the rest painted very soon..Greg

Hi zapXR6T, 315 rwkw

Many thanks Jeff and all the boys at F.I.S.T

My ute gained 3 lb. of boost wiht the PWR I/c have since changed the piping from I/c to the inlet as its only 50mm where it goes under the battery, fitted a new 4inch exhust,968 injectors,tuned by FIST 300 + rwkw 1/4 mile speed 116mph next the auto.....Greg

Jeff lets not mention kw's at the moment

Sounds like those boys at FIST know there stuff

Jeff does this mean that my ute is not on the dyno at this moment

might as well come along for the ride

No fcuking worries Jeff...........

Seen Jeff's dyno sheet today and he's right only 415 rwkw

Mine has two one above and one down low

that's the power stearing cooler the trans cooler is in the radiator only on my T ute

Thanks BlownBA

Hi all,can someone tell me what pipe is the return pipe on the trans oil cooler is it the top or bottom one.many thanks Greg

Hi Sixrt, boost was up just over 12psi had it backed of to 10.5 was told that injectors and 3" exhust just not up for more but was getting around 290rwkw,now looking for more.Greg

Hi Scotty, I am working on a few mods at the moment eg. 4" exhust,revised plumbing,yet another set of injectors then BOSS edit all before the trip to Darwin.Greg

photo's of piping changes........

photo's of piping changes........

Don't realy know but if you talk to Drew he will...Greg