ashturner

Just got my car back from HiTorque on the Gold Coast with its new tune of 319KW. Car feels alot better than it did and I'm very happy. Just have to wait for a nice dry day! Mods: Process West 3.2 intercooler with intake and throttle body relocation 80lb injectors after market fuel pump full stainless exhaust with 4inch dump pipe

Got the day off work so I'll be there

Finally a Goldy Cruise, if I have the day off, which is likely, I'll be there. For the moment I'll be a maybe

Hi Guys, I have BF F6 and hate that is doesn't have FPV badges on it. I have the stickers off ebay, but I was wondering if its possible to fit FG FPV badges on the BF? Thanks

I had the exact same thing happen to my with my bf f6, after installing the process west kit. My battery died after a few weeks, dropped a $100 battery in and seems ok but sometime the car is rough to start. I have a feeling it needs a higher cranking battery now.

Hi Guys, I have a BF Typhoon and my drivers seat has seen better days. It squeaks and the right hand side is worn away from getting in and out. I am wondeirng if its possible to swap the drivers and pasenger seats over as the passenger seat is basically new. any help would be appreciated

I thought that at first too. When I put the new battery in I checked all the terminals on the battery to make sure they were on well. I have the battery in the front bar under the intake, its a process west setup. I'll admit I havn't checked the ground where is the main grounding point? thanks guys

Hi Guys, I have a BF II F6 typhoon and I love it, but its starting to do wierd things electrical wise and hopefully someone here can shed some light on what I can do. I bought the car around 8 months ago and when I got it it started perfectly. In the last 2 months the car has had trouble starting. It culminated when stuck out the front of autobarn my car wouldn't start. I got a battery pack and started it and got a new battery put in and that seemed to make it better but it was still not a smooth start. I've had the battery for only a month now and the car still struggles to start sometimes. Another wierd problem is that when the car struggles to start sometimes when it starts and I drive off the speedo will not register speed. I am just wondering what you guys think the problem could be. Not sure where to start, starter motor, coils, spark plugs. Any help would be greatly appreciated, Ash also the car has been tuned and also has process west 4inch intake and intercooler and has not since been retuned. Could this be the cause?

No I have the 4inch intake, and the piping under the batter is mostly silicon. I have seen most aftermarket guages use vacum lines to register boost, is it possible to use this with the FPV guages?

Hi guys, I reciently installed a processwest 3.2 kit in my BF f6 typhoon. I noticed when pulling the stock intercooler out that the boost sensor was attached to the intercooler. Is it possible to rewire the sensor back into the line so my guage will work again. any help would be appreciated, thanks

I did this with my BA xr6 a few months ago. I was doing the door illumination LEDs and thought the yellow light didn't match. I ended up using a spare blue LED I had lying around. I can't entirely remember how I did it or if I used a resistor but it is definitely do-able with a regular 3mm led.

regarding one side of mine not working, it turns out the converter box decided to die on me! it was installed correctly and was mounted with double side tape. Lucky I had a spare one laying around due to having snapped one of the rings and going halves with Steve. all working again :)

I installed mine two days ago and they looked awesome, was taking some photos with some mates last night and was all good and just sitting their idling when the left side started flickering and died. Anyone have any idea why this would happen. It was quite hot in the engine bay could that have ruined the converter box?

Got in my car tonight and unlocked the car and the interior lights came on as expected and started the car and drove away. As I was driveling I noticed the light around the key was still on. I got to my destination, turned the car off and the interior lights didn't turn on, and the light around the key was still on. Tried the light button on the the dash and the lights still don't turn on. I've tried unlocking and locking the car and pushing some buttons but I can't get them to turn on. Does anyone have any idea or experience as to what has happened?

I had the same problem a while ago, turned out to be a blown fuse cost nothing to fix

Hey mate I was thinking of doing this too, just wondering what you used to do it and does it/how much does it reduce light output?

I'm looking at getting a single large white ccfl, possible?

Was cutting off the plastic tabs on the rings, got to the last one and on the last cut heard a crack. Managed to crack one of the large ones in the middle. They are ridiculously thin and more fragile than I though! Is is it possible to get just a large white CCFL ring? anyone else cracked one and wanna go halves?

I have been looking around for a projector housing for my BA for ages. I have seen them for the focus and other ford cars. someone please make this!

I did this a few weeks back, I'll try to post picks later

yea I'm in for a set of white ones

Do you have a link for the LED foggies?

What bulbs are in the fog lights, they look really blue?