Walboro 460 not priming

[EgoXR6Turbo]

So this is pretty normal then yer? 
 

I can adjust the fuel pressure easily whilst it’s on idle to meet 60psi

 

And just to confirm the walboro intake 460 have a check valve. I did check their website and it said it does but thought wouldn’t hurt asking as well

[Puffwagon]

I would advice against adjusting the fuel pressure after the car has been in for a tune. Although there is no need for lower fuel pressure with the power capacity of that reg, you never know what someone has done with the tune, and they may have made it run with a 3 bar base rather than a 4 bar base.

 

If you are genuinely concerned about the state of the tune etc, go back to the tune shop and ask them to give it a once over.