TurbskiBarra New Member 7 Member For: 5y 4m Posted 25/05/21 10:16 AM Posted 25/05/21 10:16 AM Looking to see if I could pick someone's head on this, have put in Crow valve springs, and just setting up atomic timing kit. Iv come to do timing, cylinder one is at tdc cams are 12 o clock and all timing marks line up perfectly, after fitting it all and trying to turn over by hand turns slightly but then seems very hard, and won't turn, would this be down to stronger springs? Don't want to push it to hard. Tia 😁
Puffwagon Legacy Donating Member 16,348 Member For: 11y 7m 27d Gender: Not Telling Posted 25/05/21 10:20 AM Posted 25/05/21 10:20 AM Take the spark plugs out and try again. Alternatively stop being a softcock and try a bit harder. 2
TurbskiBarra New Member 7 Member For: 5y 4m Posted 25/05/21 10:27 AM Author Posted 25/05/21 10:27 AM Spark plugs out, must be the second one XD just seems really hard hahah
Puffwagon Legacy Donating Member 16,348 Member For: 11y 7m 27d Gender: Not Telling Posted 25/05/21 10:29 AM Posted 25/05/21 10:29 AM Haha yeah well if it's locking up with the plugs out then you've got a problem. It should turn over fairly easily. I don't spose you've got a manual and left it in gear by any chance?
TurbskiBarra New Member 7 Member For: 5y 4m Posted 25/05/21 10:32 AM Author Posted 25/05/21 10:32 AM Nah auto and she's in N
Puffwagon Legacy Donating Member 16,348 Member For: 11y 7m 27d Gender: Not Telling Posted 25/05/21 10:38 AM Posted 25/05/21 10:38 AM I mean fairly easy is subjective right?! I use a cheap ass torque wrench and 22mm socket on the balancer bolt to turn mine over and you still need a bit of effort.
TurbskiBarra New Member 7 Member For: 5y 4m Posted 25/05/21 10:44 AM Author Posted 25/05/21 10:44 AM Hmm I'll give it abit more force, thought I check before I buggered something haha, do you usually notice a difference in turning them over after valve spring job?
Puffwagon Legacy Donating Member 16,348 Member For: 11y 7m 27d Gender: Not Telling Posted 25/05/21 11:01 AM Posted 25/05/21 11:01 AM I can't really remember cos it's been a while since I did mine. I was turning my cam with an allen key in the cam gear bolt the other day and I had to smack it fairly hard to get it to move, if that's any indication.
TurbskiBarra New Member 7 Member For: 5y 4m Posted 03/06/21 06:51 AM Author Posted 03/06/21 06:51 AM On 25/05/2021 at 11:01 PM, Puffwagon said: I can't really remember cos it's been a while since I did mine. I was turning my cam with an allen key in the cam gear bolt the other day and I had to smack it fairly hard to get it to move, if that's any indication. Hey mate bit of topic now and old, know if engine light should stay on when cranking her over, got spark, and can smell fuel through exhaust but won't start😅
Puffwagon Legacy Donating Member 16,348 Member For: 11y 7m 27d Gender: Not Telling Posted 03/06/21 08:07 AM Posted 03/06/21 08:07 AM Engine light stays on while cranking. Something to check is to pull the plugs and make sure they are clean and dry.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now