Jump to content

Recommended Posts

  • Waiting for the 1st N/A 12!
  • Legacy Donating Member
  • Member For: 18y 7m 8d
  • Gender: Male
  • Location: Sydney
Posted

Make sure you buy it through cms.

Best pricing on the gtx 3582


  • Like 1
  • Donating Member
  • Legacy Donating Member
  • Member For: 19y 10m 25d
  • Gender: Male
  • Location: Sydney
Posted

Look at the difference the GTX3582r makes to a std FG XR6 turb's?

11fins are definately better than 7...

The punch down low with a GTX3582r on a hi-mount with a big stall was quite astonishing

Of course total engine output and OMFG is one thing when the bonnet is popped.. but keeping the tailshaft/gearbox and axles in one piece is another and the wallet is going to be hit HARD !..

My tuner made over 740rwkws with a GT42 at 30psi and 810rwkws with NOS

740rwkw is alot through a normal GT42 and at only 30psi...any details on the car etc ?

  • Like 1
  • Waiting for the 1st N/A 12!
  • Legacy Donating Member
  • Member For: 18y 7m 8d
  • Gender: Male
  • Location: Sydney
Posted

Prob hp milzy


  • Legacy Donating Member
  • Member For: 13y 4m 29d
  • Gender: Male
  • Location: WA
Posted (edited)

I should be able to get a gtx3582r for $1750. I think that is pretty cheap, if I do get it for that price then I would be happy to pass it on to all donating members for the same.

Edited by AdamIan69
  • Legacy Donating Member
  • Member For: 21y 2m 18d
  • Gender: Male
  • Location: Bendigo
Posted

Sure you don't want a 4202. Lol. I got a full setup with Etm extractors, twin external gate set up and 4 inch dump. Mine was pushing a good 1200 hp at 30 psi. Done couple of dyno runs and that's it. My goals are a lot different.

  • Like 1
  • Waiting for the 1st N/A 12!
  • Legacy Donating Member
  • Member For: 18y 7m 8d
  • Gender: Male
  • Location: Sydney
Posted

Sure you don't want a 4202. Lol. I got a full setup with Etm extractors, twin external gate set up and 4 inch dump. Mine was pushing a good 1200 hp at 30 psi. Done couple of dyno runs and that's it. My goals are a lot different.

Well considering the 4202 is only rated at 1000hp enging hp max and I've seen an fg ute with one pushed to 36psi and it made 800 hp rear wheel. Im guessing like a few others are where and how you found another 400 hp?

  • Like 1
  • Banned
  • Member For: 13y 2m 28d
  • Gender: Male
Posted (edited)

LOL not all the heavy hitters want to give their game away Matt ?

I personally saw one go 992hp at the treads through a powerglide and no NOS so ?

Edited by Got Boooooost
  • Waiting for the 1st N/A 12!
  • Legacy Donating Member
  • Member For: 18y 7m 8d
  • Gender: Male
  • Location: Sydney
Posted

Whos car was that?

LOL not all the heavy hitters want to give their game away Matt ?

I personally saw one go 992hp at the treads through a powerglide and no NOS so ?

You sure that had a 1.01 rear on it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...