Keyless Entry

[simmo]

Many of you probably allready know ,but you can change the unlocking sequence in your ba

option 1. You hit unlock and all doors open

option 2. you hit unlock and only drivers door opens ,hit unlock again and the other doors unlock.

just thought it may be helpfull.

only thing is I cant remember how to do it ,I think it s in your car manual,or the dealer will tell you.

[sharkey]

Simmo

With the doors closed push and hold both the lock and unlock buttons for 5 seconds. The blinkers will flash and that key has been changed from one mode to the other.

You can do it for each key.

[GlennAUII]

Ah yes... The unlocking stages..... we owned our AU2 for 3 years.... and I found out I could turn the 2 stage annoying sh*t unlocking OFF!!!

HATE IT! lucky the ba came with it already switched to single stage :o

[FORDTECH]

You can also have the interior unlock button reset so that when the car is locked while you are in it and push the unlock button all doors except the drivers door unlock.

[richdave]

You can also have the interior unlock button reset so that when the car is locked while you are in it and push the unlock button all doors except the drivers door unlock.

2 questions

1. Why? :banghead:

2. How?

[FORDTECH]

You can also have the interior unlock button reset so that when the car is locked while you are in it and push the unlock button all doors except the drivers door unlock.

2 questions

1. Why?

2. How?

2 answers:

1/Taxi(so the passengers cant walk around and rip the driver out)

2/Using WDS.

[sash]

XR6 Turbo Taxi's. Cool

[cqae]

one thing to be aware of though, using 2 stage unlock will upset some aftermarket alarm systems