g6e-psi Member 46 Member For: 13y 8m 1d Gender: Male Location: melbourne Posted 23/09/12 03:12 PM Share Posted 23/09/12 03:12 PM so all is good out there !!My turbo is a gtx35rmy 60 fts were 1.8 to 2.3 I cant stall it up it just wants to spin the sreet slicks so thinking of doing a stall but not 100%I broke my rear jack shaft on the line was on the hand brake and before I could take off snap rite in the middle of the rear of the tail shaftI thought it would of busted at the uni's but they held up.just waiting to do the valve springs then will take it for another runim trying to run a 10 and have a daily driver out of it hope I can but only time will tell 1 Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299225 Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 17y 1m 6d Gender: Male Location: adelaide hills- 'race air' central Posted 23/09/12 09:50 PM Share Posted 23/09/12 09:50 PM are you guys on lsd's or single spinners? Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299249 Share on other sites More sharing options...
AirStrike Donating Members 387 Member For: 16y 7m Gender: Male Posted 24/09/12 12:16 AM Share Posted 24/09/12 12:16 AM so all is good out there !!My turbo is a gtx35rmy 60 fts were 1.8 to 2.3 I cant stall it up it just wants to spin the sreet slicks so thinking of doing a stall but not 100%I broke my rear jack shaft on the line was on the hand brake and before I could take off snap rite in the middle of the rear of the tail shaftI thought it would of busted at the uni's but they held up.just waiting to do the valve springs then will take it for another runim trying to run a 10 and have a daily driver out of it hope I can but only time will tellHahaha mine did the exact same thing. Stalled up on the handbrake, shaft twisted in the centre and then broke the rear uni.My effort: 1 Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299305 Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 7m Gender: Male Location: SE Melbourne Posted 24/09/12 12:40 AM Share Posted 24/09/12 12:40 AM inb4 video of johnny Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299321 Share on other sites More sharing options...
G6ET8U Playing with Sports Bikes... Silver Donating Members 1,927 Member For: 19y 7m 24d Gender: Male Location: Whistling, GTX. Posted 24/09/12 07:19 AM Share Posted 24/09/12 07:19 AM (edited) A cracking good job you did on yours too Dave!are you guys on lsd's or single spinners?Harrop TruTrac here...Jack Edited 24/09/12 07:21 AM by G6ET8U Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299444 Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 17y 3m 2d Gender: Male Location: Vic Posted 24/09/12 07:42 AM Share Posted 24/09/12 07:42 AM inb4 video of johnnyBelongs in Agwbabr. Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299454 Share on other sites More sharing options...
AirStrike Donating Members 387 Member For: 16y 7m Gender: Male Posted 24/09/12 12:16 PM Share Posted 24/09/12 12:16 PM F6 LSD in mine. Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299642 Share on other sites More sharing options...
g6e-psi Member 46 Member For: 13y 8m 1d Gender: Male Location: melbourne Posted 24/09/12 01:27 PM Share Posted 24/09/12 01:27 PM mine is a full change so I could put a strengthend and bigger tail shaft,running full preston auto's lsd with 3.46 gears that me and andrew have decided with after talking bout what I want the car to do.its been a tough time with the car but once the little bugs are sorted it should do the time.now I have to find the right slick and front runner combo (wheels and tyres) if any one has ideas would help as I dont want a stall yetI wanna 10sec pass with standerd auto and the street slicks arnt holding the car to well after the 3.46's were put in the standerd stall has dropped and at 1700 rpm it starts turnng the tyres. Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299667 Share on other sites More sharing options...
g6e-psi Member 46 Member For: 13y 8m 1d Gender: Male Location: melbourne Posted 24/09/12 01:32 PM Share Posted 24/09/12 01:32 PM 11.48 @ 123 so far.The plan is now on for a 10 sec daily driver Jack what power you got if you dont mind me asking??? Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299670 Share on other sites More sharing options...
g6e-psi Member 46 Member For: 13y 8m 1d Gender: Male Location: melbourne Posted 24/09/12 01:44 PM Share Posted 24/09/12 01:44 PM this is my tailshft[attachment Link to comment https://www.fordxr6turbo.com/forum/topic/81969-how-are-the-g6e-turbos-going-down-the-14-mile/page/3/#findComment-1299673 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now