Electric Oil Pressure Gauge

[macca2042]

finally recieved my cobalt oil pressure gauge but have a query, how do people on here hook them up to the motor? mine has a oil pressure sender like there is in the side of the block but is this alright?? I have the feeling if I use this sender and disconnect the standard one it might bring the oil light on the dash?

any help is greatly appreciated

[FPV6T]

use a brass T-piece to fit the factory sender and the Auto meter sender in it. VDO 230.032, I THINK it is 1/4"NPT for the original pressure sender and the Autometer was 1/8".

Edited 02/09/12 08:12 AM by FPV6T

[macca2042]

awsome!! thanks for the help, can measure the threads and work it out

[JETURBO]

Here ill help u get this

Then use a liquid thread sealer not thread tape it needs to get a good earth off the block again

Just fitted mine its a pain in thr butt to fit but totally doable part was 18 bucks

[GTEXXED]

Here ill help u get this

Then use a liquid thread sealer not thread tape it needs to get a good earth off the block again

Just fitted mine its a pain in thr butt to fit but totally doable part was 18 bucks

Should I earth mine out Jet,she always works consistantly and matches OBD port readout temp.