macca2042 Donating Members 150 Member For: 15y 9m Gender: Male Location: Yarrawonga Posted 14/08/12 11:15 AM Share Posted 14/08/12 11:15 AM So I've searched the forums looking for the info I require but it seems 95% of guys here run mechanical boost gauges where I plan to run all electronic. Im usin auto meter coalt gauges, boost and oil pressure but Im at a loss as to how to wire the gauges properly. An earth will be easy to find, key on power I'm not sure about and also where to hook the boost sender upto.. Plan to run the wires out of the grommet on the left hand side of the icc, gonna get a speco oil filter adapter for the oil pressure but yeah any help is greatly appreciated Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/ Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 9m 22d Gender: Male Posted 14/08/12 11:50 AM Share Posted 14/08/12 11:50 AM Wire the power from the cigarette lighter 12v wire and earth to dash crossbrace or similar, earth MUST be good, boost sender wiring should be integral? My drift gauges were Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/#findComment-1279454 Share on other sites More sharing options...
natsxr6 Member 117 Member For: 17y 1d Location: penrith Posted 15/08/12 12:34 AM Share Posted 15/08/12 12:34 AM As above just lift the surround up from the shifter starting at the center console pull towards the icc only has 6 clips and there's your power wire. Easiest this way Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/#findComment-1279569 Share on other sites More sharing options...
macca2042 Donating Members 150 Member For: 15y 9m Gender: Male Location: Yarrawonga Posted 15/08/12 11:55 AM Author Share Posted 15/08/12 11:55 AM Thanks guys, big help, one more thing, where has everyone mounted the boost sender? Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/#findComment-1279850 Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 5m 25d Gender: Male Location: Probably above atmospheric pressure Posted 15/08/12 12:42 PM Share Posted 15/08/12 12:42 PM T piece off of the thin tube running from the BOV on my BFII - stock intake setup. Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/#findComment-1279862 Share on other sites More sharing options...
macca2042 Donating Members 150 Member For: 15y 9m Gender: Male Location: Yarrawonga Posted 16/08/12 10:36 AM Author Share Posted 16/08/12 10:36 AM Cheers, so one more question, so how is everyone holding their gauges in the holder, I got an saas twin gauge holder but no way to hold the gauges in the holder.. Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/#findComment-1280313 Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 9m 22d Gender: Male Posted 16/08/12 10:42 AM Share Posted 16/08/12 10:42 AM Velcro! Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/#findComment-1280315 Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 5m 25d Gender: Male Location: Probably above atmospheric pressure Posted 16/08/12 01:32 PM Share Posted 16/08/12 01:32 PM (edited) Double sided tape, only because the provided long bolts and nuts don't line up through holes in the gauges to the pods. This is inside the pods, from rear of gauges. I don't have the same brand gauges. Edited 16/08/12 01:33 PM by -SteveR- Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/#findComment-1280380 Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 15y 4m 1d Gender: Male Location: Christchurch, New Zealand Posted 17/08/12 02:21 AM Share Posted 17/08/12 02:21 AM FPV twin mount for the win.All the wiring can go to the ICC and cig lighter to do your full time power, switching power, and dimming circuit. There are threads with the colours stated. It was just the other day someone was asking which wire on ICC for the power or something like that and I did search out the answer for that thread. Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/#findComment-1280515 Share on other sites More sharing options...
Xr6govroom New Member 19 Member For: 11y 8m 10d Gender: Male Posted 10/12/13 07:59 AM Share Posted 10/12/13 07:59 AM I have a question if I was to buy a new set of gauges boost and a new oil pressure gauge will I need to rewire them up or can I some how use the ones that my car has atm want to replace my crap cheap ones now I have the $$$ any advice much appreciated cheers. Link to comment https://www.fordxr6turbo.com/forum/topic/81456-electronic-gauges-help/#findComment-1445025 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now